Unsolved
This post is more than 5 years old
1 Rookie
•
21 Posts
0
2287
vsa unity change virtual hardware
i have use versione:
UnityVSA-4.1.1.9138882
bat if change virtual hardware on appliance:
- increse cpu
- increase ram
- upgrade virtual hardware to esx 6.0
the VSA not starting and block
I remember that earlier versions had this problem if change configuration
so I wonder why you write: minimum configuration required:
A minimum of 12 GB RAM per UnityVSA VM is recommended. | |
** | A minimum of 2 virtual cores per UnityVSA VM is recommended. |
then if I can not change anything!!!!!
there are licenses that allow you to change the configuration?
***************************
another questions:
after upgrate to 4.1.1.9.x
apper on license:
"compression"
"ip multu tenancy"
as a free license is activated for these?
thanks
AndreD Dell
Moderator
Moderator
•
239 Posts
0
April 19th, 2017 00:00
Hi alvaro5555,
Unity VSA hardware config cannot be changed.If you change it, the VSA will not boot as you have found.
For the other questions, if the license is green for those features then they will be enabled.
I would think these features will be available after upgrade.
Andre
alvaro99
1 Rookie
1 Rookie
•
21 Posts
0
January 11th, 2018 00:00
if buy and use retail license, can i change and increase cpu and ram?
Rainer_EMC
8.6K Posts
0
January 11th, 2018 02:00
I dont think so
alvaro99
1 Rookie
1 Rookie
•
21 Posts
0
January 11th, 2018 05:00
the purchase of the license is bound by the advantage of changing cpu and ram. two cpu and 12gb ram
they are too few, it goes into crisis easily
if buying the license does not allow you to change cpu and ram, it is useless to buy
Rainer_EMC
8.6K Posts
0
January 12th, 2018 02:00
the license governs the capacity
if you have indications that CPU/memory is not enough for your workload then please work with your local Dell EMC team
alvaro99
1 Rookie
1 Rookie
•
21 Posts
0
January 12th, 2018 04:00
buy license only for increase cpu and ram, not for capacity storage.
two cpus are too few: just do a deploy of a virtualmachine or a s-vmotion and the two cpu go to 120% and also the ram.
all those I know who use this vsa software appliance have this problem
Rainer_EMC
8.6K Posts
0
January 15th, 2018 03:00
then please work with your local team to get feedback to product management
maybe open a product enhancement request
alvaro99
1 Rookie
1 Rookie
•
21 Posts
0
January 16th, 2018 01:00
who should I write for the changes?
alvaro99
1 Rookie
1 Rookie
•
21 Posts
0
January 31st, 2018 01:00
can you email me for request hardware changes?
thanks
Rainer_EMC
8.6K Posts
0
January 31st, 2018 07:00
please work with your local EMC or partner (pre-)sales for that