Unsolved
This post is more than 5 years old
31 Posts
0
9972
Total allocated capacity to each host
Hi All,
Is there any single command (symcli) to to know the allocated capacity of each host in DMX and Vmax ?
What I am looking is, the total capacity allocated to each host.
Now am using list capacity and show view option to know about the allocated capacity, it would be better if i able to get the details in a simple way !
Saul_K
31 Posts
0
December 18th, 2012 22:00
Thanks for the response ! Is there any report I can pull out from SMC ? Which option from SMC will give the complete host allocated capacity information ?
Archuperi721
110 Posts
0
December 18th, 2012 22:00
SMC will help you J
Regards,
Periyakaruppan N (Peri),
Archuperi721
110 Posts
0
December 19th, 2012 02:00
Try
Symaccess –sid xxxx show view xxxxxxxxxx
Regards,
Periyakaruppan N (Peri),
sauravrohilla
859 Posts
0
December 19th, 2012 02:00
Single command to see the total allocated space to a host /initiators:
C:\Users\srohilla>symaccess list devinfo -ig ATL-CLCUST01_IG -sid XXXX
Symmetrix ID : 000XXXXXXXX
Initiator Group Name : ATL-CLCUST01_IG
Last updated at : 12:50:29 PM on Tue Dec 11,2012
Host Initiators
{
IG :atl-pc-b23102_IG
IG :atl-pc-b23104_IG
IG :atl-pc-b23103_IG
}
Sym Host Cap
Dev Dir:P Physical Device Name Lun Attr (MB) Masking View Name
----- ----- ----------------------- ---- ---- ------ -----------------
028D 07E:1 Not Visible 1 (M) 1970010 ATL-CLCUST01_MV
0295 07E:1 Not Visible 2 (M) 1970010 ATL-CLCUST01_MV
------
Total Capacity 3940020
Archuperi721
110 Posts
0
December 19th, 2012 02:00
Try
Symaccess –sid xxxx show xxxxxxxxxx
Regards,
Periyakaruppan N (Peri),
Saul_K
31 Posts
0
December 19th, 2012 03:00
Thanks for all the response.
I am aware about the symaccess show view command and list capacity -host command. that all will give only the deatils about a single host. suppose if i have 1000 server, i need to run the command for the 1000 times. !!!
What i am looking for is, is there any simple way to see the allocated capacity for the 1000 servers ? some kinda report or something like that ?
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
December 19th, 2012 04:00
if you have EMC ControlCenter or Prosphere you can generate reports like that, otherwise you can use symcli and script something like that.
Saul_K
31 Posts
0
December 19th, 2012 04:00
Thanks Dynamox, as always you will comes up with some answer We do have prosphere , we no longer use ECC.
so could you plz give some idea, how to pull that details from prosphere ?
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
December 19th, 2012 07:00
I have not migrated to Prosphere myself yet but looking at the latest release notes there is a charge back module that i suspect would provide that information
https://support.emc.com/docu44992_ProSphere-1.7-Release-Notes.pdf?language=en_US
Zikas
278 Posts
0
December 28th, 2012 03:00
As Dynamox told me that SymmReport is not available to the customer, then for DMX if you have created aliases you could use the "symmaskdb -sid XXXX list capacity -Host hostname" command.
Also via Prosphere as Dynamox said.
Zikas
278 Posts
0
December 28th, 2012 03:00
Hi Saul,
i have the solution for DMX and VMAX.
For DMX you have to use SymmReport tool. Through that tool a xls file will be generated for all hosts. A big amount of info will be found in that xls!!!!
For VMAX you can use the SMC to find the total allocated capacity for all Storage Groups.
If you Unisphere for VMAX, EVEN BETTER!!!!!!!!
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
December 28th, 2012 03:00
SymmReport is not available to customers
EddieSwann
1 Message
0
April 30th, 2013 12:00
Try this
>symaccess -sid xxxx list view -detail
I think this is what you are looking for
satheeshnp
11 Posts
0
May 2nd, 2013 04:00
symmaskdb list capacity -host
will give the entire list.You can put script on this and you get your results.
cincystorage
467 Posts
1
May 2nd, 2013 06:00
I wrote a script for this..Shared it on my blog..
Symmetrix LUN Reporting | Virtual Storage Zone