This post is more than 5 years old
8 Posts
0
4371
SRA returns 'discoverDevices' failed. No replicated devices could be found.
I am in the midst of setting up VMware's SRM and have run into a problem with the SRA (5.0.2)
Everything seems to be setup fine yet when I query the array pairs (Array Pairs tab under Array Manager in SRM), I get:
SRA command 'discoverDevices' failed. No replicated devices could be found. Please verify the correct array managers and array pairs are configured.
EMC has confirmed that my Mirrorview/A consistency group is setup and replicating correctly (Mirrorview Enabler for SRA 5.0.39.139 is installed on SRM boxes).
I can't seem to find or get in touch with anyone at EMC who knows anything about inner workings of the SRA. VMware is, perhaps fairly, saying this is an EMC SRA problem. This has been extremely frustrating - so close, yet so far.
In case anyone from EMC needs it, Service Request #59111628 is where I am stuck.
Arrays are VNX 5300s.
Any help or suggestion will be ENORMOUSLY appreciated.
-
Tim
sullybags
45 Posts
2
December 11th, 2013 06:00
possible known issue.
this issue happens when all mirrors are in consistency groups.
create a small LUN and set that LUN up for individual mirroring (i.e. mirror it but do not put it in a
consistency group), then that should fix the problem.
tcimunn
8 Posts
0
December 11th, 2013 11:00
Worked like a champ!! Hurrah!!
Created a 100 MB LUN and I appear to be good to go. Thanks a bunch Dave!! We've been chasing our tails for weeks on this.
stianj
3 Posts
0
January 27th, 2015 01:00
Ran into this now as well. The workaround works ok, but will it ever get a real resolution?
Thanks.