Unsolved
This post is more than 5 years old
22 Posts
0
1255
SRM-like solution for RP CDP
Hello,
I know the RecoverPoint’s SRM adapter does not orchestrate the local copy and doesn’t support CDP.
Is there any alternate solution to simplify VM failover to local CDP copy, just like what SRM can do for RP remote copy?
thanks,
Masa
zhaos2
643 Posts
0
September 3rd, 2012 20:00
Currently VMware only have SRM to provide automated disaster recovery. As SRM is designed for site-to-site replication, it only works with remote replication as RecoverPoint CRR. Although Recoverpoint CDP is unaffected by SRM operations, it is still remain available for use with 'Group is in maintenance mode, it is managed by RecoverPoint'.
LouisLu
161 Posts
0
September 3rd, 2012 23:00
Hi,
I believe your questions should be splited to two parts. Becase 3.2 indeed support CLR CGs, which is with ability to repliate from the production to local copy (the "CDP' part). Please check RecoverPoint Adapter 1.0SP3.
Regarding CDP - it is assumed on roadmap(with priority? not sure) - since by nature the SRM solution assumes a seperate virtual center at each site always with different network and different set of arrays and LUNs. Quite different from typical CDP scenario.
HEAT1
22 Posts
0
September 4th, 2012 14:00
Thanks for your response!