Unsolved
This post is more than 5 years old
5 Posts
0
552
NX4 replicated to VNX - NX4 to be replaced
Hi,
we have a remote site with one NX4 that replicates toa VNX 5200 in a datacentre.
the NX4 is to be replaced with a VNX2. if we copy all data to the VNX2 , is it possible to point the VNX2 at the existing files replicated in the DC and pickup the replication so that it does not have to copy the full 8TB back to the DC on a different replication session and destination share
thanks
Rainer_EMC
8.6K Posts
1
November 4th, 2016 04:00
you can try if common base checkpoints work - not sure if it does with the NX4
see the VNX Replicator manual and several discussions here on the forum