Unsolved
This post is more than 5 years old
40 Posts
1
1706
VIA Install version 7.0.53 for VNX5300
Hello EMC Gurus,
I am actually installing 2 different VNX 5300.
I did not find the media VNX Installation Toolbox which should be included in the cartons.
I need the file VIA 7.0.53.
On EMC support web site, I did not find it.
The file 7.0.52 and 7.0.54 are not compatible.
Also, the VNX Installation Toolbox version 1.1.0.1.11 is announced to support all VNX systems, still incompatible : the VIA included is 7.0.40
Could you give me a link, or please tell me the best way to get it.
Thank you for your help.
Best regards.
Raphlou
Raphlou
40 Posts
1
December 12th, 2012 06:00
Hello EMC gurus,
Sorry for inconvenience. I have downloaded the file VNXInstallationToolbox-Win-32-x86-en_US-2.1.0.1.007-1 which includes 7.0.54.4_via_install and it works to initialize the VNX with code 7.0.53.
Problem solved.
Best Regards.
Raphlou
JackMarengo
5 Posts
1
February 10th, 2017 04:00
Hello Raphlou!
Thanks for the update! That's help me to install mine on 7.0.52!
In fact it's writen in the description:
VNX Installation toolbox version 2.1 is used to install and configure all VNX systems running VNX OE versions 7.0.x and 05.31.x Version 2.1. ONLY USE ON SYSTEMS running VNX OE versions 7.0.x and 05.31.x.
Which is also my case!
You save me time!
Jacques
Raphlou
40 Posts
0
June 15th, 2017 07:00
Hello Jacques,
I have just seen your post, I am happy to see that my subject was helpful.
Thank you for your feedback.
Best regards.
Raphlou.
kelleg
4.5K Posts
0
June 16th, 2017 07:00
Raphlou - could you mark this post as Answered (you should also be able to award points to yourself) - that way others looking for this same information will be able to see that this topic is Answered.
glen