Unsolved
This post is more than 5 years old
4 Posts
0
1091
VNX 5300 Issues
Hello,
I am using VIA assistant to assign IP's to CS and SP's... it tok control station IP address and can't move forward saying that VNX is not found. I can login to the CS via SSh.. do any one has idea on configuring the IP from CS to SPA and SPB.
Rainer_EMC
8.6K Posts
0
January 23rd, 2012 13:00
Please open a case with support or use the support live chat
Vipin VK
812 Posts
0
January 23rd, 2012 23:00
Hi,
It is better in these cases to go for live chat or support but you may try the primus solution emc261639 for resetting the values and re-running the VIA.
Once the MAC address is detected, if you are navigating back to the same page on VIA you may fail to find the MAC address again and VIA will not continue. Be prepared to configure CS and SP network and login details etc in a single shot without any interruption.
Vipin V.K