Unsolved
This post is more than 5 years old
1 Rookie
•
121 Posts
0
832
VNXe 3150 ISCSI Configuration issue
Hello All,
Need your help on resolve our issue which we are facing on our VNXe 3150 array.
We have configures ISCSI server for both SPA and SPB using eth2 and eth3 ports. However, from the ESI end we are able to see only SPA paths on each data store. We have used 4 IPs (2 for SP) and all are in same VLAN from the switch.
From the N/W end , VNXe ETH 2 ports connected to Switch 1 and VNXe ETH 3 ports are connected to Switch. Could