Unsolved
This post is more than 5 years old
1 Message
0
3389
vnx5400 SMI-S Provider Not Supported
Hi all.
SMI-S Provider (Solution Enabler) cannot register vnx5400 storage system:
getagent from both SP
Agent Rev: 7.33.8 (1.19)
Name: K10
Desc:
Node: A-CKM00140700155
Physical Node: K10
Signature: 3686485
Peer Signature: 3678211
Revision: 05.33.008.5.119
SCSI Id: 0
Model: VNX5400
Model Type: Rackmount
Prom Rev: 33.40.00
SP Memory: 16384
Serial No: CKM00140700155
SP Identifier: A
Cabinet: DPE9
dv from TestSmiProvider (run from same host as the navicli)
(localhost:5988) ? dv
++++ Display version information ++++
CIM ObjectManager Name: EMC:
CIMOM Version: EMC CIM Server Version 2.8.4.0.0.112
SMI-S qualified version: 1.5.0
SMI-S Provider version: V8.1.0.0
SMI-S Provider Location: Proxy
SMI-S Provider Server:
Linux 3.8.13-68.3.3.el6uek.x86_64 #2 SMP Tue Jun 23 23:43:15 PDT 2015 x86_64 VM Guest OS (64bit Libraries)
Solutions Enabler version: V8.1-2054 0.0
addsys result
(localhost:5988) ? addsys
Add System {y|n} : y
ArrayType (1=Clar, 2=Symm) [1]:
One or more IP address or Hostname or Array ID
Elements for Addresses
IP address or hostname or array id 0 (blank to quit): 172.17.111.101
IP address or hostname or array id 1 (blank to quit): 172.17.111.102
IP address or hostname or array id 2 (blank to quit):
Address types corresponding to addresses specified above.
(1=URL, 2=IP/Nodename, 3=Array ID)
Address Type (0) [default=2]:
Address Type (1) [default=2]:
User [null]: manager
Password [null]: ******
++++ EMCAddSystem ++++
OUTPUT : 1
Legend:0=Success, 1=Not Supported, 2=Unknown, 3=Timeout, 4=Failed
5=Invalid Parameter
4096=Job Queued, 4097=Size Not Supported
Note: Not all above values apply to all methods - see MOF for the method.
OUTPUT : 1
in Leged 1 for "Not Supported"
similar result on Windows SMI-S Provider (same version)
As far as I understand , vnx5400 must support SMI-S and registration on SMI-S Provider
Please help with this problem.
Rainer_EMC
8.6K Posts
0
February 28th, 2016 07:00
Please see the SMI-S provider release notes
You need to install SMI-S provider version 4.6.2 for VNX support
kelleg
4.5K Posts
0
March 3rd, 2016 10:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen
JovAe_V
2 Posts
0
March 4th, 2016 09:00
Same issue here
Solutions Enabler SMI-S Provider 8.1.0
VNX 5700
Addsys results in 1 - Not supported
Interoperability issues between 8.1.0.0 VNX?
Rainer_EMC
8.6K Posts
0
March 6th, 2016 09:00
as I had written above SMI-S provider 8.1 doesnt support VNX - you need to install the SMI-S provider version 4.6.2 for VNX support
This is also documented in the release notes.
Rainer_EMC
8.6K Posts
0
March 22nd, 2016 08:00
@Renzo and @JovAeV
can you please confirm that it works now once you have installed the correct Version of the SMI-S Provider ?
JovAe_V
2 Posts
0
March 23rd, 2016 01:00
Yes, once SMI-S 4.6.2 was installed VNX arrays were discovered again without problems. Too bad 8.1 is not supported (yet). Any ideas when it will be?
Rainer_EMC
8.6K Posts
0
March 23rd, 2016 13:00
you will need to stay on the 4.6 family