Hey everyone, I had the same code 10 problem with Teredo Tunnel Pseudo-Interface when I connected my laptop with a public library router. Fortunately I found this solution which really worked it out! (My OS is Vista x64 SP2, but I think XP and Win7 can also follow the same solution)
Solution: 1. Open command prompt with administrator credentials (Find CMD and right-click - Run as Administrator). 2. Enter netsh environment. Type "netsh" and ENTER. 3. "int teredo" and ENTER 4. "set state disabled" and ENTER. 5. Open Device Manager and uninstall "Teredo Tunneling Pseudo-Interface". 6. Open command prompt with administrator credentials once again. 7. netsh + ENTER. 8. "int ipv6" + ENTER 9. "set teredo client" + ENTER 10. Open Device Manager and Scan for new hardware. 11. Select "Show hidden devices" from the View menu. You will now see that it is present without errors with any luck.
I suggest you to update the network drivers for the LAN and wireless cards by entering the Service Tag on the following page: http://dell.to/QjjZDA
Please reply to this message if the issue persists with the system model number (Inspiron 15R) and the version of Windows installed (Windows 7 64-bit).
I bought a inspiron 15 (i3 processor, 500gb hdd, 4gb ram, 1gb ati raedon graphics card) the problem is teredo tunneling is not functioning and the driver software says it is upto date and my internet connection gets disconnect after few minutes it hardly remains for 5 mins i doubt it is the problem caused by teredo..Its brand new plshelp
open up your device manager, you then need to click the action tab at the top and click add legacy hardware then click next and next again it will then scan and find nothing click next on the screen after that. Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click next and this will install it. To check just make sure it is set to show hidden devices, right click on device manager on the right and click view then show hidden devices. Got this from Tom's Hardware - worked for me
Rick.Sheeley
2 Posts
0
June 24th, 2014 08:00
From Microsoft Support site:
Hey everyone, I had the same code 10 problem with Teredo Tunnel Pseudo-Interface when I connected my laptop with a public library router. Fortunately I found this solution which really worked it out! (My OS is Vista x64 SP2, but I think XP and Win7 can also follow the same solution)
Solution:
1. Open command prompt with administrator credentials (Find CMD and right-click - Run as Administrator).
2. Enter netsh environment. Type "netsh" and ENTER.
3. "int teredo" and ENTER
4. "set state disabled" and ENTER.
5. Open Device Manager and uninstall "Teredo Tunneling Pseudo-Interface".
6. Open command prompt with administrator credentials once again.
7. netsh + ENTER.
8. "int ipv6" + ENTER
9. "set teredo client" + ENTER
10. Open Device Manager and Scan for new hardware.
11. Select "Show hidden devices" from the View menu. You will now see that it is present without errors with any luck.
Sources:
http://forums.techarena.in/hardware-peripherals/892007.htm
http://www.microsoft.com/technet/net...v6/teredo.mspx
DELL-Rajath N
4 Operator
4 Operator
•
1.8K Posts
0
March 3rd, 2013 23:00
Hi,
I suggest you to update the network drivers for the LAN and wireless cards by entering the Service Tag on the following page:
http://dell.to/QjjZDA
Please reply to this message if the issue persists with the system model number (Inspiron 15R) and the version of Windows installed (Windows 7 64-bit).
Dipjoy
1 Message
0
October 13th, 2013 05:00
Hi,
I bought a inspiron 15 (i3 processor, 500gb hdd, 4gb ram, 1gb ati raedon graphics card) the problem is teredo tunneling is not functioning and the driver software says it is upto date and my internet connection gets disconnect after few minutes it hardly remains for 5 mins i doubt it is the problem caused by teredo..Its brand new plshelp
bayazidbostami
1 Message
1
March 27th, 2014 12:00
what can i do if microsoft tunneling adapter is missing
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 1st, 2014 12:00
Jiptrack
13 Posts
0
June 26th, 2014 03:00
You can reinstall it. Step By Step Guide To Install Microsoft Teredo Tunneling Adapter
theintoeko
1 Message
0
August 9th, 2014 00:00
Hello
I already following but can not fixed....
please help to me.......
koverus
1 Message
0
May 24th, 2020 02:00
Fixed this by following this article:
https://www.reddit.com/r/Windows10/comments/bqnwi9/microsoft_teredo_tunneling_adapter_missing_in/
windows 10k, adapter missing from "add" and device manager