Unsolved
This post is more than 5 years old
21 Posts
0
20102
Precision M60 Installed memory incorrectly reported in XP
I have searched high and low for an answer to this, but to no avail.
I have installed 2 properly matched 1GB memory modules in my Precision M60, but XP will report only 760MB. I have tried all of the standard recommendations (remove and replace the chips, etc.) This appears to be unique, since most other threads on this issue involve installations of 4GB only being reported as 3GB. Despite days of searching, I have found no one with a similar complaint.
I would appreciate any advice on this. If there is not a way to fix this, is there a way to confirm how much memory is actually available to XP? (I have FreeRAMXP installed and it also reports only 760MB of RAM available.
Thanks in advance.
rickmktg
11.9K Posts
0
November 20th, 2006 14:00
Gene007
21 Posts
0
November 20th, 2006 14:00
rickmktg
11.9K Posts
0
November 20th, 2006 14:00
rickmktg
11.9K Posts
0
November 20th, 2006 15:00
Gene007
21 Posts
0
November 20th, 2006 15:00
Gene007
21 Posts
0
November 20th, 2006 15:00
rickmktg
11.9K Posts
0
November 20th, 2006 16:00
rickmktg
11.9K Posts
0
November 20th, 2006 16:00
rickmktg
11.9K Posts
0
November 20th, 2006 16:00
Gene007
21 Posts
0
November 20th, 2006 16:00
Slot 'DIMM_A' has 1024 MB
Slot 'DIMM_B' has 1024 MB"
Gene007
21 Posts
0
November 20th, 2006 16:00
Gene007
21 Posts
0
November 20th, 2006 17:00
rickmktg
11.9K Posts
0
November 20th, 2006 19:00
Gene007
21 Posts
0
November 20th, 2006 20:00
rickmktg
11.9K Posts
0
November 20th, 2006 20:00