Hello

 

I have 2 Dell Powerconnect 6248 switches.

On each switch i created 2 VLANs (VLAN 10 & VLAN 20)

VLAN 10 has ports 1/g1 to 1/g6

VLAN 20 has ports 1/g7 to 1/g12

 

I also connected both switches at port 1/g48 (but nothing more).

 

Now I want to make a trunk line between the 2 switches that carries both VLANs (I've made a drawing - http://www.cryptex.be/trunk.jpg). Communication between VLAN 10 and VLAN 20 should not be possible.

 

I'm kinda stuck on how to achieve this. The manual isn't helping me much further. I tried it through CLI & webinterface but i can't make it to work.

 

Could anyone help or point me to some examples on this ?

 

Sincerely,

Dave