This post is more than 5 years old
12 Posts
0
45743
Setting up my Ram in a Area 51 machine.
Hello, got this machine as a gift over two years ago. Its a Area 51 machine, and whats been placed in it is 3 sticks of Corsair XMS3 DDR3 12GB ram with a Dram frequency of 2000 MHZ. Thing is only about 1000 MHZ is being used in it and I been trying to figure out how to set the timings of the ram to 9-10-9-27. Already set the voltage to its recommended 1.65V. Could anyone tell me how to do this?
Alexandrious
12 Posts
0
June 1st, 2015 15:00
Alright, heres what I did, I took the P24 into the 6+2 pin socket, the P20 into the 6 pin, took the jump from the P21 into the socket with the P24. I dont know why the 22 doesnt exist, for some reason the Yellows are labeled 23 and 24. The whites are 20 and 21. I tried to put in the 23 and borrow the jumper but it would not fit. Looking at this again, yea, im gonna try again to get it to fit.
Edit: Now I see what I did wrong. Your version is slightly different, your 6 and 2 is on the right node. Mines is on the Left. You took your 20 primary into the right and used the 21 jump with it, and your 23 primary on the left. Now I understand. Alright, so gotta do it in reverse for mine. brb again.