Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

745

April 7th, 2015 10:00

Adding a 8 GB line card

Hello,

Slots 8/9 are currently empty on my MDS 9509's. I need to add an additional 8 GB line card. Can we do that as Non Disruptive FRU?

Many thanks in advance!

Admingirl

1 Rookie

 • 

20.4K Posts

April 7th, 2015 13:00

should be fine then, take switch backup, ground yourself to the switch itself and gently slide the blade inside . It will take a couple of minutes to boot up (it might need to be either upgraded or downgraded to match the current version on the switch ..it will happen automatically), whole process is non-disruptive process.

614 Posts

April 7th, 2015 11:00

show module

Mod  Ports  Module-Type                         Model              Status

---  -----  ----------------------------------- ------------------ ----------

1    24     1/2/4 Gbps FC Module                DS-X9124           ok

2    24     1/2/4 Gbps FC Module                DS-X9124           ok

3    24     1/2/4 Gbps FC Module                DS-X9124           ok

4    24     1/2/4/8 Gbps FC Module              DS-X9224-96K9      ok

5    0      Supervisor/Fabric-2                 DS-X9530-SF2-K9    active *

6    0      Supervisor/Fabric-2                 DS-X9530-SF2-K9    ha-standby

7    22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok

Mod  Sw              Hw      World-Wide-Name(s) (WWN)

---  --------------  ------  --------------------------------------------------

1    5.2(6a)         1.7     20:01:00:0d:ec:a0:ba:c0 to 20:18:00:0d:ec:a0:ba:c0

2    5.2(6a)         1.7     20:41:00:0d:ec:a0:ba:c0 to 20:58:00:0d:ec:a0:ba:c0

3    5.2(6a)         1.7     20:81:00:0d:ec:a0:ba:c0 to 20:98:00:0d:ec:a0:ba:c0

4    5.2(6a)         1.6     20:c1:00:0d:ec:a0:ba:c0 to 20:d8:00:0d:ec:a0:ba:c0

5    5.2(6a)         1.6     --

6    5.2(6a)         1.6     --

7    5.2(6a)         1.4     21:81:00:0d:ec:a0:ba:c0 to 21:92:00:0d:ec:a0:ba:c0

Mod  MAC-Address(es)                         Serial-Num

---  --------------------------------------  ----------

1    00-13-80-a8-c9-78 to 00-13-80-a8-c9-7c 

2    00-13-80-a8-ca-8c to 00-13-80-a8-ca-90 

3    00-13-80-a8-c9-0c to 00-13-80-a8-c9-10 

4    c8-4c-75-b1-28-54 to c8-4c-75-b1-28-58 

5    00-19-e7-a8-4d-c8 to 00-19-e7-a8-4d-cc 

6    00-19-e7-a8-4d-9c to 00-19-e7-a8-4d-a0 

7    00-23-eb-4f-0d-20 to 00-23-eb-4f-0d-28 

1 Rookie

 • 

20.4K Posts

April 7th, 2015 11:00

please provide output from "show module" and "show hardware"   (scramble serial numbers)

1 Rookie

 • 

20.4K Posts

April 7th, 2015 11:00

is the new module the same model as in slot 4 ?

614 Posts

April 7th, 2015 11:00

Thank you Dynamox, will do that now.

1 Rookie

 • 

20.4K Posts

April 7th, 2015 13:00

no worries.

614 Posts

April 7th, 2015 13:00

Yes it is.

614 Posts

April 7th, 2015 13:00

Awesome!!! Thanks so much Dynamox!

No Events found!

Top