This post is more than 5 years old
13 Posts
0
1365
July 20th, 2007 13:00
Adding ED-140M to Connetrix Manager 7.01
Hi
My Client is running Connetrix Manager 7.01 and presently using 2 ED-64M and DS-24M2's with firmware revisons 5.02 & 6.02. Do anyone know the procedure to add ED-140M ?
My Client is running Connetrix Manager 7.01 and presently using 2 ED-64M and DS-24M2's with firmware revisons 5.02 & 6.02. Do anyone know the procedure to add ED-140M ?
0 events found
No Events found!
felipon1
96 Posts
0
December 4th, 2012 02:00
Hi there,
ED-64M and DS-24M2 have been EOSL for a while, but ED-140M will still be around for at least for two more years...
The user manual for ED-140M is available in powerlink.
Rgds
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 31st, 2012 07:00
those switches are so old, why do you want to use those ? I don't even know when their end of life is.
Harry289826411
1 Rookie
•
67 Posts
0
October 31st, 2012 07:00
There is a project ED - 140M used, good configuration?
If there is a configuration document, including some failure analysis, share, thank you
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 31st, 2012 07:00
English please
Harry289826411
1 Rookie
•
67 Posts
0
October 31st, 2012 07:00
项目有台ED-140M 没用过，好配置么？