This post is more than 5 years old
2 Intern
•
385 Posts
0
835
July 6th, 2007 06:00
Replacement for fzone?
Has anyone found a nice way to extract zone and port information from Connectrix switches via the command line.
I use this tool to generate some very basic text extracts and audit reports which I can not do easily in StorageScope. Hoping with StorageScope 6.0 and custom reports these can go away, but just curious to see what anyone else has found.
Specific information looking to find:
* Extract of the ports in a switch with the WWN attached.
* Extract of information about the switch itself (name, WWN, etc.)
* Extract of active zone from the switch including members in the zone
The two audits I run that the ECC tools do not handle nicely:
* History of when a port was last active - used to track when things fall off the network and we do not find out about them. I know we could do this manually but looking at a report showing last active date for a port is much nicer.
* Audit of inactive zones - ie zones that are in the fabric but do not have an active host port.
* The reverse - active ports without zones. There is a Storage Scope report for this.
Thanks in advance.
I use this tool to generate some very basic text extracts and audit reports which I can not do easily in StorageScope. Hoping with StorageScope 6.0 and custom reports these can go away, but just curious to see what anyone else has found.
Specific information looking to find:
* Extract of the ports in a switch with the WWN attached.
* Extract of information about the switch itself (name, WWN, etc.)
* Extract of active zone from the switch including members in the zone
The two audits I run that the ECC tools do not handle nicely:
* History of when a port was last active - used to track when things fall off the network and we do not find out about them. I know we could do this manually but looking at a report showing last active date for a port is much nicer.
* Audit of inactive zones - ie zones that are in the fabric but do not have an active host port.
* The reverse - active ports without zones. There is a Storage Scope report for this.
Thanks in advance.
No Events found!
Ed Schulte
2 Intern
•
151 Posts
0
December 6th, 2017 06:00
Hi there, In our effort's to clean up the forum, we came across your question / statement. If the question / statement is still valid, not expired and you need an update please reach out again and we try to get it answered. As for now we set it to “answered.” Regards, Ed Schulte