Hi All,

We have two Dell EqualLogic sans both different models. One is PS6100 and the other is a PS6210 and the PS6210 has a drive failure. The PS6100 has two spare drives and my question is can i take out the spare drive and put it in the PS6210 where the drive has failed. The only difference between the drives is the disk model and revision apart from that they are identical in size and speed. And they are configured as raid 50. I am also thinking of ordering  the following discs below and would these discs work in the PS6210

Seagate ST1200MM0088 1.2TB SAS (Serial Attached SCSI) Hard Disk Drives

PS6100

model 70-0400

==============

ps6210

model 70-0425

 

Any help would be appreciated