spine leaf

Hi,

we have 2X5248f switch its connected to firewall.all internet traffic will go to firewall.

all leaf switch connected to spine

question-

1.what need to configure leaf switch to get redundancy(port-channel or VRRP)

2.spine both are in vlt,leaf are connected to spine both switch what need to configure.

3.both 5248f are connected to firewall how to configure ports because a1 and a2 port I will create lag in firewall.

4.vlt I done the configuration is it required to configure port channel in vlt domain

5.current scenario we have running rstp is it required to change rpvst.

Responses(1)

DELL-Marco B

Moderator

•

3.7K Posts

0

December 10th, 2024 18:08

Hello,

here some info that it can help

Leaf Switch Redundancy: Use Port-Channel (LACP) or VRRP for redundancy.
Spine Configuration in VLT: Ensure VLT domain is configured and use LACP for leaf connections.
Ports on 5248f to Firewall: Configure ports as a LAG (Link Aggregation Group).
Port Channel in VLT Domain: Yes, configure port channels for redundancy and load balancing.
RSTP to RPVST: Consider switching to RPVST for better VLAN control.

I hope it can helps you.

Thanks

View All

No Events found!

Networking General

spine leaf