1 Rookie
•
1 Message
0
18
November 10th, 2025 20:29
Connect power Tesla P100 on R740
Hi, I need to install a GPU card Nvidia TESLA P100 on a R740 server. I don't have the riser with power connector, so I think can connect P100 power to J_BP0 or J_BP2 on system board. It is possible?
In other hand I don't know which cable choose to connect system board to the P100 card. I see two option, 4VPD3 and TR5TP. Which one should be used?
No Events found!
DELL-Young E
Moderator
•
5.3K Posts
0
November 11th, 2025 01:26
Hello, thanks for choosing Dell and welcome to our community.
As you can see from here P100 is supported.
PowerEdge_R740_Spec_Sheet_CH.pdf
However, do note that you will need a whole kit. You can refer to this.
https://www.dell.com/community/en/conversations/rack-servers/gpu-enablement-customer-kit-for-r740/684699c96756d62d6b7fbe68
From here on, we advise you contact Sales.
Server and Data Center Accessories | Dell USA