This post is more than 5 years old
4 Posts
0
29470
PE2800 - how to remove system board
Hi, I have need to swap out system board on my PE2800 to see if it is bad or not.
I have everyting removed from the case except for the system board. Cannot figure out how to get the system board out.
Step-by-step, what do I need to do to get the system board out of the case?
Best Regards.
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
1
October 12th, 2011 11:00
Datteber,
Here is a link to the manual steps on removing the motherboard from the 2800.
<ADMIN NOTE: Broken link has been removed from this post by Dell>
If you already have everything removed then you should only need to lift the blue retention pin located next to the processor, on the far side from the power supplies.
datteber
4 Posts
0
October 12th, 2011 12:00
Thank you for your quick reply!