1 Rookie
•
3 Posts
0
103
October 4th, 2025 20:51
Precision 3630, POST stuck at DELL logo
I have an i9 Precision 3630 with a RX590. Last week I got a 32 inch LG Ultragear monitor. The system boots into Win11 as long as the monitor is not connected. Have tried both HDMI ports and the Graphics port. Still hangs at POST. Also tried two hdmi cables. After connecting the monitor after POST, all is "OK". Work around is to have monitor connected while I am using it. Disconnect when not, so that updates etc can be done. Does anyone have any suggestions. Thanks in advance.
No Events found!
user_db7d9d
1 Rookie
•
3 Posts
0
October 7th, 2025 20:48
After a viewing a few videos about POST issues, the semi obvious became apparent. On my i9 I also have an external connected. The i9 had no issues with this and the HP monitor connected to the system. Once I disconnected the external drive, the i9 POSTS with the LG monitor. Good enough for me now! Thanks to all who pondered a solution.
user_db7d9d
1 Rookie
•
3 Posts
0
October 6th, 2025 09:21
@user_9d15ed Thanks, will try later. I was using a HP QHD without any POST issues. I thought I would try out a curved monitor. I swapped monitors and then this!