Search

TLDR - The docs show cabling the controllers in a way that isolates each subnet to a switch. Why? I thought it would be ideal to have a path through each switch to both controllers via both subnets. Obligatory "I'm not a storage guy" or "Network guy" for that matter. We're trying to figure out the

hi i have a decommissioned Equallogic PS4100 how ever no one knows the pass. i woud like to use it again but. after reading some discussions im a bit lost. i do have a serial cable

I couldnt find documentation about port bonding except port 0 and 1 on embedded 4 ports card but this is what i dont want to use for block traffic I have Dell powerstore t and would like to use only IO module for block traffic The question is Can ports on IO module be bonded my assumption is that th

hello everyone , what is the major differences between emc 5084 storage array and emc 484 storage expansion enclosure , and can i use only the expansion enclosure emc 484 only ?

We bought used PS6110 and wiped the memory. Im connected via CLI and can login with group admin running setup Im unable to connect ETH0 to any port anywhere.               Group Manager Setup Utility  It appears that setup was run previously, but it did not

Hello team, We have an isilon gen6 with H500 nodes. We have apc ups. Is it possible to initiate auto shutdown to the Isilon when a power cut occurs ?

Hello All. How longs does ViPR SRM keeps data and reports for an array, once the arrays has been removed from the discovery center. We removed the array from discovery, and it has been 10 days, but we still see the array and its data/reports etc. Total time since last collection ofcourse shows as 10

Is anyone here aware of any Dell recommended settings for decreasing the amount of time Windows Server takes to failover to another available path? I have come across a few things (unrelated to Dell) that suggest making various registry edits to achieve 1 second path replacement! In my testing so fa

Hello all Unity 300 running OE 4.5.1.0.5.001, i want to upgrade it to last version 5.3.1.0.5.008 looking to the matrix i am unable to understand the target path. could you please help if it is possible to upgrade directly from 4.5.1.0.5.001 to5.3.1.0.5.008 otherwise, what is the advised target to fo

We have 2 Unity arrays; UnitySource and UnityDestination We've created the replication ports and session to replicate data from Source to Destination. All is green and seems fine, data moves to destination just fine. When we initiate a planned failover, ESXI loses access to the Datastore.  I

I'm trying to figure out which card I need for an ML3. As far as I can tell one of these should work: QLE246x FC QLE26xx FC  BR8x5 FC  It would go in an R740 or R750. Anyone have any ideas?

Hi guys! I'm trying to change my Dell Storage SCv3020 IPv4 address to another one since I'm moving this unit from test to production. Both test and production of course has different VLANs and IP subnets for iSCSI and management. However, I'm not able to to so and was hit with a somewhat weird erro

Hello Dell storage experts:  My company recently purchased a new ME5024 with 24 x 3.84TB SSD.  We are in the midst of setting the storage to be used as VM datastores.    We read through the deployment guide and VMware best practices and come to the following regarding the setup

Dear Dell support, I have downloaded UnityVSA-5.3.0.0.5.120.OVA and downloaded XML file later we have converted into .lic file still getting this popup. Please help me! Thank for all   

Hello, How add new sc420 to storage sc5020(without any enclosure).  I dont see information on documents, We must shutdwon storage And Connect sc420 to storage or Connect sc420 to storage And power on sc420 ?

After decommisioning of an unused CX3 storage we are reconfiguring an old CX4-120 for backup replication purpose. CX4 had initially: - enclosure 0 with 15 disks (450GB FC STE45085 CLAR450 disks) - enclosure 1 with 15 disks (1TB SATA II WD1002FBCLAR1000 disks) We are trying to switch to: - enclosu

Hello good evening, after following all the recommendations made and analyzing the manual, unfortunately we were unable to do so, thank you for your support.

When RP4VM initially came out, it used an iSCSI connection between the splitter and the ESXi for the data path. The current deployment document refers to a kernel port, and there is no mention of an iSCSI connection.Has a redesign taken place over the 5-6 years ? What is the connectivity path now ?

Hello, It seems https://www.dell.com/en-us/dt/software-downloads/forms/unityvsa.htm is broken, and upon completing the form you get "Invalid Access" when trying to get "7RGCR_Dell-UnityVSA-5.3.0.0.5.120-OVA-image.ova". Secondly it seems like Community Edition is no longer easy to find as EMC links

Hi all, I have recovered two ECS Gen2 4-node systems from a customer and we are now trying to check they are working ok. After connecting public/private network with the Arista switches I can successfuly access via SSH to all nodes but I am not able to access GUI. After sniffing traffic I found eac