Search Results (7K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hello! I failed finding information on the Dell U.2 enablement kit P31H2 so I am asking here. Does this card absolutely have to be installed in an x16 PCIe Slot or will it work at a x8 as well (with reduced max. speed)? What does the card do exactly? Splitting 16 lanes into 4x4 with bifurcation s
Question
•
Rack Servers
Community Accepted Solution
Hello, I'm trying to expand existing RAID10 on PowerEdge R740xd. Currently we have 8 drives configured as RAID10. I bought 2 extra drives of the same size, and added in to the server. Then I've logged in to iDRAC 9, In the disks menu i see two newly added drives that currently are in the state: read
Question
•
Systems Management General
Community Accepted Solution
Hi All,I have an old T320 which is having the below Issues, Just trying to confirm whether it might be a board issue -No Display on Embedded VGA or Graphics card -No Post (Even with Minimum Requirements for Post) -No Beeping when ram removed -CPU Internal Error - Constantly Power cycles on and off
Question
•
PowerEdge Hardware General
Community Accepted Solution
Keep getting full and predictive failures on a specific drive in a RAID6 array, on r730. What is the best drop-in replacement? (Exact same or equivalent Dell part?) Would any ST6000NM0095 do, or does it have to be a Dell PN? Would any (Dell or non-Dell) drive work as long as it's the same capaci
Question
•
Rack Servers
Community Accepted Solution
racadm version: 9.4 local machine os: rhel8 Updating from iDRAC 2.85.85.85 -> 2.86.86.86 is failing using racadm from local machine to the remote idrac ip. using the following racadm command from a RHEL 8 terminal: racadm -r <idrac ip> -u <idrac-root> -p <idrac-root-password>
Question
•
Systems Management General
Community Accepted Solution
I need firmware hdd s/n wmayp7582326 Wwn:50014ee0ae6a5d9a P/n: 01kwkj Firmware' 1s03 Mdl: wd5003abyx-18wera0 Dcm hgrnthtjcg Dcx:_ 8e02e76r2 R/n: 771702 Please need firmware my data lost thanks dell team
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hi Team Can we upgrade idrac 4.4 firmware version direct to latest idrac 7.0 version ? Thank you
Question
•
Systems Management General
Community Accepted Solution
I have a Power Edge R440 In Open manage under Storage/perc H730P adapter (Embedded)/Connector 0 (RAID)/Enclosure (Backplane)/Physical Disks. I see 5 drives, 2446.62GB i believe to be a mirrored C drive. and 3 893.75 GB drives i expect to be the RAID 5 for D: They are all showing good, but i need to
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello! I'm a complete noob to this so please excuse my lack of knowledge. I'm looking for some help with this. I bought a used R730, and am currently configuring it. The hard disks I have are 4 new 1.2 TB SAS Hard Drives (Dell WXPCX). I'm trying to set up RAID 6 on it, and then will be installing
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hi, My Dell T640 does not turn on, it has 2 power supplies connected, but when I press the power button, it does not start and the LEDs on the motherboard show the following status: DS0 - OFF DS1 - ON DS2 - OFF DS3 - OFF DS4 - OFF DS5 - BLINK DS6 - BLINK Any idea about it.? Thank's a lot.
Question
•
PowerEdge Hardware General
Community Accepted Solution
The powersupply is mentioned with 100-240V 50/60Hz for AC input OR 240V for DC input. This means we can connect 110V AC or 230V AC. However for DC is it only 240V DC, can't we use 120V DC ?? Why the range of DC is not mentioned as like in AC.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Recently added a second CPU to this server. I went with the Xeon E5-2640 v4, but after installing the heatsink and powering it back up, I get hung up on this screen. Any ideas on what is causing this?
Question
•
PowerEdge Hardware General
Community Accepted Solution
We have a T310 PowerEdge Server, with this PCIe slots free: 2 x8 1 x4 2 x1 We need to install an PCIe board with 2 SSD slots, to make an RAID -1 system of SSD disks. But all of this card require Bifurcation support on PCIe slots. Any of the PCIe slots support bifurcation? Thanks Wladimir Estrag
Question
•
PowerEdge Hardware General
Community Accepted Solution
I'm seeing this message in the Hardware Log on my server. I saw in another post that it might be a driver issue. Any thoughts?
Question
•
PowerEdge Hardware General
Community Accepted Solution
After reading https://arstechnica.com/security/2024/04/supply-chain-snafu-causes-intel-and-others-to-ship-hackable-hardware-for-5-years/ and the associated articles, I am curious to know if my T340 has an exposure. Am I worried about it? No, not really however if the main board does have an exposur
Question
•
PowerEdge Hardware General
Community Accepted Solution
I recently took over IT for a small school that is running a used PowerEdge R320 running Windows Server Core 2016. For the first couple months everything was running just fine. When I came in one day, I could hear from a few rooms away that the fans were running at full speed on the server. I am not
Question
•
Power & Cooling
Community Accepted Solution
Hello , When i try to access to alert policy menu in openmanage , i receive a error.This is happend since i have modify one alert policy. ( in the message area ) How can i list and/or remove a alert policy in CLI or other ? Best regards
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I'm on OME Version 4.0.1 (Build 29) Recently, I discovered about 40 managed systems within OME went missing -- like, completely gone. I had to rediscover the servers, add them back to various Services groups, etc. What was odd was that the systems didn't have the updated root credentials
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi team,I've been looking everywhere including this forum, and I'm still with conflicting answers so I'd rather ask please:My R630 came with literally factory BIOS and iDRAC versions:BIOS 1.0.4 iDRAC 2.01.00.01 A00If I want to upgrade to latest versions, the safe option seems to be 1 step at a time
Question
•
Systems Management General
Community Accepted Solution
I have a Poweredge T420 that has 2 virtual disks setup, a raid 1 for the os and a raid 5 for data. Disk 0:1:0 has predicted failure showing. Do I need to take the failing disk offline before I hot swap it?
Question
•
PowerEdge HDD/SCSI/RAID