Search Results (7K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I have a Dell Poweredge r840 with a Mellanox ConnectX-5 Infiniband PCIe card. I recently upgraded from Centos 7 to Centos Stream 9. Any reboot causes the iDRAC to log: PCI1318 A fatal error was detected on a component at bus 2 device 0 function 0. Issuing "lspci" reveals
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, We have an MX7000 with several MX740C blades. Recently we migrated the OS to BOSS and I removed the SAS drives. Since doing that, each blade is complaining about a missing SAS drive. I tried acknowledging the alerts and even tried clearing the configuration of the PERC. But the built in Open
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
My alert policies are no longer sending emails since upgrading from 3.10 to 4.0.1. I am able to send a test email from Application Settings -> Alerts -> Email Configuration, but no matter what I try I can't get my alert policies to send emails. No settings were changed after the upgrade to 4.
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Is there a software called realtek hd audio manager or drivers for dell power edge server tower t620 , enable sound for windows server 2022? Please send me a link attached of the website, greatly appreciated
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, i'm looking for the part number for the caddy in the T360 16 gen server -- 3,5inches.Are they the same as 15-14-13 gen? Thanks
Question
•
PowerEdge Hardware General
Community Accepted Solution
I am in the process of migrating to OMEVV. If I register OMEVV to vCenter will it remove the current OMIVV functionality? I would like to have everything configured and tested in OMEVV before removing OMIVV from vCenter.
Question
•
OpenManage Integration for VMware vCenter
Community Accepted Solution
Dear Dell Support, We are reaching out to seek guidance regarding our Dell PowerEdge R440 server (Service Tag: removed by mod) configuration. Specifically, we have received communication from VMware regarding a potential increase in subscription prices. To manage costs effectively, we are exploring
Question
•
PowerEdge Hardware General
Community Accepted Solution
I am running OME Version 3.10.2 (Build 13). How do can I find out if this version is safe from the xz utils backdoor recently discovered? If it is vulnerable, what version would be a remediation to close the backdoor? https://www.helpnetsecurity.com/2024/03/31/xz-backdoored-linux-affected-distros/
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello, We have a Dell PowerEdge T330 server. We downloaded the applicable SUU from dell's website. We mounted the SUU, and ran the SUU launcher. We were able to get several updates successfully. However, the update with a "Component" name of "OpenManage | iDRAC Service Module" failed. SUU says the
Question
•
PowerEdge Hardware General
Community Accepted Solution
I have a poweredge t150 server, i installed raid 1 (2 HDD 0-1) and window server 2019 boots normally.I tried to fault tolerance by removing the hdd 1 when i turned server off. When I turned it back on, there was an error "uefi0116 One or more boot drivers have reported issue(s)" but the operating sy
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hopefully I got the part number correct for the Front Tray bracket that holds PERC cards. I've got 6 Dell R350's that I'm adding H355i Front PERC cards to. I'm missing the screws that hold the PERC card to the tray. There are 4 of them each. Can anyone provide the screw sizes that
Question
•
PowerEdge Hardware General
Community Accepted Solution
I am trying to install a Nvidia tesla v100 (pci-e) into a PowerEdge r7425. The tesla v100 has a 8 port to a 8/8. The PowerEdge has a board to a 6 + 2 / 6 connector. Does anyone know what cable I need to use the v100 or do I even need a cable?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi, I am trying to update the idrac to the latest version. I assume the this is possible to be done from some old distributions like RHEL7. This is is the error when I am performing check from Proxmox 7.4 ./ESM_Firmware_KPCCC_LN32_2.92_A00.BIN -c /opt/dell/updatepackage/ESM_Firmware_KPCCC_LN32_2.9
Question
•
Rack Servers
Community Accepted Solution
Hello All, Is Dell PowerEdge 32GB RDIMM, 3200MT/s, Dual Rank, 8Gb BASE x4 Memory compatible in Dell VxRail servers? Best Regards
Question
•
Rack Servers
Community Accepted Solution
Hi all, I have had this R430 laying around for awhile running plex and simple things it has 128GB and 2xE5-2640v4 10C 20T 90W chips but when i learned about docker and what i could do, i was looking for more horse power, so i bought two 145W E5-2697A v4 chips of a friends that does server breakage f
Question
•
PowerEdge Hardware General
Community Accepted Solution
Does the M640 blade has a solution to increase video performance? I am seeing this 3rd party card DXG-S7100X for PowerEdge M640 and M630 but I want to see if someone has used it and it works with Autocad. Regards,
Question
•
Blades
Community Accepted Solution
Hello: I have 3 drives in this t^30 and it appears one of them has gone bad. I get the error "Foreign Configuration found on adapter" (screen shot attached) . When I press C I get the BIOS screen but not sure what to do next (screenshot attached). I do not want to lose the data
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
I have a Dell R730XD that is configured as 24+2 using the perc card that will be used with ZFS. I have heard that this card doesn't act as a "true" HBA so was thinking of replacing the perc with an HBA330. Will this work fine with my SAS expander? Which model do I need to get? One thin
Question
•
Rack Servers
Community Accepted Solution
Hello all, I purchased an R650 10 Bay server and I want to switch out the HBA355i RAID for an H745 RAID Controller. Can I use the same RAID cable for the H745? If not, then can you please let me know what the part number is for the H745 RAID controller? Thank you!
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello, I purchased a surplus Dell PowerEdge T320 on eBay and I found the matching rails P/N (5N9DY) from another post here. I ended up purchasing the readyrails kit from eBay as well. Do I need anything else to install the rails on the tower and start using it as a rack server or is the rail kit a
Question
•
PowerEdge Hardware General