Search Results (7K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hallo Dell-Community, ich stehe vor der Überlegung, 15K SAS 900GB Festplatten in meinem Dell PowerEdge R720 (16 Bays) zu verwenden. Laut dem offiziellen Handbuch werden nur SAS 15K 146GB, 300GB und 300GB (SED) unterstützt. Allerdings habe ich von anderen Anwendern gehört, dass sie erfolgreich 900GB
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello, I need to purchase several R6515 700W PSUs. Can someone please help me with the part number? Thank you!
Question
•
PowerEdge Hardware General
Community Accepted Solution
When I reset IDRAC, the enterprise license disappeared.
Question
•
Rack Servers
Community Accepted Solution
Hello, We've detected a DSU issue while updating to get13. On our PowerEdge R230, R430, R530, etc., DSU tries to install the Drivers-for-OS-Deployment_Application_K8WCN_LN_19.05.08_A00. This package is only compatible with FC830, M830, M830, FC430 (see Dell OS Driver Pack). Here is the DSU output
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi all, I am writing a script to automate BIOS changes and I am stuck on the part where I have to decide whether to Apply and Reboot or At Next Reboot. I am using Python and iDrac Redfish API. I want to go with At Next Reboot however I am stuck on it. I used: boot_set
Question
•
Systems Management General
Community Accepted Solution
On a fresh OME 4 deployment from the 4.0.0.202 OVF in vSphere 7, I cannot perform the initial admin password change, no matter what I use. If I don't include a special or capital character or not long enough, then it can tell and warns me so typing in appears to be accurate. Have tried powering fu
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
R750 with PERC H745 controller. Single virtual disk RAID5 array with 8 960GB SATA SSD's. Is it sufficient to assign additional physical drives as Global Hot Spares? Will these Global Hot Spares be automatically used if there is a failure of any RAID physical drive? Reason I ask is that I see, thro
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello Dell Community, I hope this message finds you well. I am facing a perplexing issue with my Dell server that has been causing unexpected downtime. Despite thorough troubleshooting efforts, I have been unable to identify the root cause of the problem. I am reaching out to the community in the ho
Question
•
Rack Servers
Community Accepted Solution
Description of the Issue: I executed the following command to delete a virtual disk: racadm -r 169.254.0.3 -u root -p calvin raid deletevd:Disk.Virtual.0:AHCI.Integrated.1-1 The output indicated a successful acceptance of the storage configuration operation: RAC1040: Successfully accepted the
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello everyone, Current environment: PERC H750 Adapter (Embedded) Firmware version: 52.16.1-4074 Drivers version: 7.716.03.00 Cache Memory Size: 8192 MB Virtual Disk: 6x SSD disk 960GB in RAID-10 Is it possible to replace a virtual RAID 10 drive with 6x 960GB drives with larger 6x 1.92TB drives?Th
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Currently we planning to upgrade our "hundred years old" non-JBOD compatible ancient machines with a couple of new R660's. For the storage options, can we configure one virtual disk with RAID1 for the OS installation, and expose the rest of the disks as JBOD for use where JBOD are better choice? (
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hi Is these an MSDS (material safety data sheet ) document available for the Y2RV2 Battery? Thanks
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hi I bought a renewed Dell poweredge r730xd from Amazon and he worked fine I used Ubuntu server 22.04.3 but today I wanted to check because I had 3 drives installed but 1 wasn’t in usage so I thought to remove that one but wasn’t sure which one it was and I did that during running server and Ubuntu
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello all, I downloaded the latest Hyper-V OME 4.0 vhd file and after creating the VM, assigning 16GB RAM and 4 processors, I just get a blinking cursor on a black screen when trying to boot it up, no errors. I have tried installing it on several servers (Server 2019 and Server 2022 hosts) and get
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Since installing the Dell ISM on Rocky 9.2 all of the hosts are showing ipv6 network errors. These machines are not running ipv6 or IPTABLES (Firewalld is being used). This appears to have crashed 2 of our 17 machines last night. This docuemnt show some info on iDrac communication (page 11) https:
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
R750 with PERC H745 controller. Existing RAID5 array with 7 960GB SATA SSD's. These are MICRON, revision D3DJ004. Took part number (XMWMK) and bought 3 more online. New drives are INTEL, Revision XCV1DL69. OK to add one of these to the existing RAID5 array? OK to add the other 2 as Global Hot Spare
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello We have installed the OMEVV plugin in our vCenter and it works fine as long an vcenter admin is using it. A nonadmin vcenter user cant start it. He receives the error 10008 "vCenter user does not have required privileges to access this feature."Which privileges are needed? The user has all DEL
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi there, I have a brand new T150 Poweredge Server. I've installed Server 2022 standard. Each time I try to install Matrox video driver (and I've tried a couple different versions), I hit a bsod and it reboots. Documentation says this server should work with "Windows Servers and Hyper-V" Is there
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi will there be any more software accutation for Dell r620 server bios / idrac in 2024?
Question
•
Rack Servers
Community Accepted Solution
Hello, I want to install a HBA330 in my R730 but i need the cable to connect to the backplane. I have ordered the 06TFJ5 but i later found that someone else used the FN73C cable.At first glance it seem that they are the same, could anyone help me check whether these are interchangeable, if not i wi
Question
•
PowerEdge HDD/SCSI/RAID