Search Results (6.3K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I seem to have forgotten what this is used for and is it needed for Storage Manager Client?
Question
•
Compellent
Community Accepted Solution
Hello, Could you help me with the following question? I have a powerstore 500t storage, which supports a SAP Hana environment virtualized on 3 ESX hosts, the month of April the storage had used 35TB and the month of May the team happened to have used 14TB, therefore the space used was reduced by 21T
Question
•
PowerStore
Community Accepted Solution
I recently purchased a used EMC VNXe 3150 from someone. I'm trying to connect it, but I'm having trouble. From my research and the Dell support resources, I've learned that I need the Connection Utility Tool. However, I cannot find a place to download it. When I go to the Dell page for the VNXe 3150
Question
•
VNX
Community Accepted Solution
Just read that you should MCS when available instead of MPIO. Is this true and does the ME5 support MCS? Didn't find anything in the administrator's guide
Question
•
PowerVault
Community Accepted Solution
Hi. We have two Dell Compellent SC4020 in our environment with two Dell Compellent SC420 enclosures with 12 slots free each. My question is : Can a mixture of both 10K spindle disks and SSD drives be used in the enclosure free slots? For example 12 sas disk and 12 ssds or should be only 24 disks/ssd
Question
•
Compellent
Community Accepted Solution
Hey I'm having trouble rebuilding this Compellent Raid and wondering how I utilize 80% of each disk for my raid/storage. It is showing as 0% and 0.01 allocated. I did just rebuild it so not sure if it will eventually allocate more of the drives? but I didnt see any options on how to specify this. If
Question
•
Compellent
Community Accepted Solution
I have a 124T lto-5 and need to reset password. The code is **57452** thanks
Question
•
PowerVault
Community Accepted Solution
Hi all, I am searching for ME4024 inner rails. Seems the railkit H61HF isn't including the inner rails but I don't find a part number for these pieces. Could someone help with that? Thanks in advance
Question
•
PowerVault
Community Accepted Solution
Hi Can we order ME5084 with 84 hard drives installed inside?? is it safe to do so? Each hard drive is 3.5 inch which weighs around 800g. I worry that 84 of those drives could damage ME5084 while delivering it abroad, i.e. during shipping. But at the same time, I want drives to be installed by DELL.
Question
•
PowerVault
Community Accepted Solution
What does Dell generally recommend? I haven't found anywhere in the docs (yet) that recommends if LUNs and volumes should be 1:1 or if they can be 1:Many.
Question
•
PowerVault
Community Accepted Solution
I have a customer's question and can't find any information. We are working 3rd party deployments and were looking to see if there are any tools available for Unity storage arrays similar to ProDeploy for the EMC server line. Our project management team has informed us that we sho
Question
•
Unity
Community Accepted Solution
Hello everyoneping is not answer my storage , ı found some article about ıpmi tool usage and connect to storages local service portsFistly ı have seen front side sp fauld led is amber , i have restarted each sp from ıpmi tools and front side amber led now is off but my problem is still continue not
Question
•
Unity
Community Accepted Solution
Hello everyone, Is it possible to connect MD1400 to ME412 or ME424? Now we have MD1400 with PERC H840 RAID Adapter and we need to expand space.I read in an old conversation that MD1400 is not compatible with ME4 Series due "2 different softwares that are not compatible.". Is this relevant now, a
Question
•
PowerVault
Community Accepted Solution
Hello Dell storage experts:I am going to update disk firmware in PowerVault ME5024 storage. Guidelines tells to stop I/O before the firmware update. but I still could not find the way of doing so. please guide to me stop I/O of system.
Question
•
PowerVault
Community Accepted Solution
Hi i have a powervault MD3220 which is currently running on 1 raid controller in slot 1. In slot 0 currently there is no hardware. So i have bought a new controller which i want to put in with a different fireware too. Can i put it with out powering off the whole unit?
Question
•
PowerVault
Community Accepted Solution
Hello, I am setting up a ME5024 with 10x 4TB disks for VM storage and was wondering about pool setup. If I use the auto setup it creates one RAID 6 30TB pool if I create a manual pool of 2x RAID 6 and one RAID 1 using both controllers I would lose about 11TB of space. How much of a performance hit
Question
•
PowerVault
Community Accepted Solution
Hi, This morning we've replaced a faulty drive on our compellent. After the replacement when i look in our DSM we see the disk 2 times. One of them healthy and working. The other one is completely empty and not in use. is it possible for me to just delete the disk without any issues?
Question
•
Compellent
Community Accepted Solution
Please, can somebody tell me how can I delete a user quota from Unisphere or UEMCLI, SVC, API, Powershell? There is no DELETE button or options in user quota page in UNISPHERE UNITY GUI or from UEMCLI there is no a REMOVE or DELETE option. I put the hard quota limit and soft limit to ZERO, all go
Question
•
Unity
Community Accepted Solution
Hi All, We have a legacy Cisco UCSC-C220-M3S server running Windows 2008R2. It hosts a smallish SQL 2008R2 instance that links to another 2008R2 virtual server that contains about 8TB (and growing) of mostly incompressible content (PDFs, JPGs, etc). This application is owned outside our IT departme
Question
•
PowerStore
Community Accepted Solution
Hi there, Are there any recommended NVMe/TCP settings or best practices for operating systems, particularly for VMware, similar to those for iSCSI? Additionally, does the VSI plugin apply these settings to ESXi hosts, or is there a roadmap for such integration? Furthermore, if 10GbE is intended for
Question
•
PowerStore