Search Results (6.3K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Closed
I'm running an r620 with esxi, connected to an MD1200 running RAID6, connected via perc h800I need to add more storage and have 2 more MD1200s.My question is more on 'how'.Can I just chain the 2 new enclosures full of drives to the current, power them all on, then expand my RAID6 via OMSA somehow?An
Question
•
PowerVault
Community Accepted Solution
Closed
Hi guysI have a question about downgrade Unity 480 . Can I downgrade my Unity 480 from version 5.2.2.0.5.004 to the previous versions? if I can, how? Thank you, guys,
Question
•
Unity
Community Accepted Solution
Closed
Hi, we are currently trying to get one of 2 MD3860i units back in service. The devices were running without problems until shutdown. The data on the HDDs/SSDs was deleted, but we got the IPs and actually a password. We can connect to the device with the MDSM and it shows us that it is in recovery
Question
•
PowerVault
Community Accepted Solution
Closed
Hello, We don't know md3820f password thereforce i will reset password but I am not sure something information on the datasheet. when i will reset password on the controller switch button, is all erease configuration or just only password reset ? thanks a lot.
Question
•
PowerVault
Community Accepted Solution
Closed
I'm a little confused by the OE Revision Matrix. All 3 of my SANs are currently running on OE version 5.2.1.0.5.013, and I would like to get to the 5.3.0.0.5.120 version. Can I go directly to the newest OE, or do I need to stage the 5.2.2.0.5.004 version first? Thanks in advance!
Question
•
Unity
Community Accepted Solution
Closed
Good afternoon I am wondering what might cause a Dell hard drive to have its attribute 120 DriveLine show up as 1 (0) Unknown, instead of EnterprisePlus? Getting the error "system is unable to accept disk....with serial....and Dell part number xxxxx because disk drive line Unknown is not compatible
Question
•
Compellent
Community Accepted Solution
Closed
Getting Below error after getting EVAL license from Dell for UnityVSA 5.3 The specified operation could not be completed. Search for the error code on the support website or product forums, or contact your service provider, if available. (Error Code:0x4) Any Solution to above error
Question
•
Unity
Community Accepted Solution
Closed
Hello, I have two challenge keys, we need to reset the password of our iSCSI brigde cards of Powervault TL2000. Can someone help us please? 6VVMVJHGX94 6VBB8P02573 Thanks in advance.
Question
•
PowerVault
Community Accepted Solution
Closed
Dear all, I have VNX5200 with 05.33.009.5.155 version I tried to upgrade to 05.33.021.5.266I have all files neededKB488877SHA2SupportVNX block OEI added all 3 files. All pre-check have pass.Upgrade process was unable to activate software on secondary SPNow Unisphere can no long
Question
•
VNX
Community Accepted Solution
Closed
Hi All, We are required by business to perform DR Failover test on our Unity NAS Server but for only one of several NAS severs configured on the array. Is initiating the Failover with Sync on just one NAS server not impact other NAS servers? Same goes with Failback is it not going to impact other
Question
•
Unity
Community Accepted Solution
Closed
I've got a TL2000 with a single LTO-6 HH drive. They are hosted by an R805 server via 6Gbps SAS HBA. I'm looking to add a second LTO-8 HH drive. Will it be compatible given the HBA is only 6 Gbps given that I'm reading the LTO-8 requires a 12 gbps SAS. Are there 12 Gbps SAS HBAs compatible with R805
Question
•
PowerVault
Community Accepted Solution
Closed
Hello everyone I have UnityVSA-5.1.0.0.5.394 running on my lab I have created 7 vmdks: one 32GB on an NVME2 disk and put it on "Extreme Performance Tier" three 100GB on RAID_1 SSD disks and put it on "Performance Tier" three 256GB on an external USB_HDD disk and put it on "Capacity Tier"
Question
•
Unity
Community Accepted Solution
Closed
HI,I'm a newbie to dell hardware.Next week I have to upgrade vsphere 6.7 to version 8.1 on an infrastructure composed of 6 PowerEdge MX740c and one scv3020 storage connected in fc.I've read the Dell EMC SC Series: Best Practices with VMware vSphere guide and from what I understand I need to do these
Question
•
Compellent
Community Accepted Solution
Closed
Hello, I got warnings from the console of a powervault md3200i of a customer. Both raid controllers batteries need to be replaced, but I was unable to find a website where I can buy new batteries for the powervault in Europe. Dell support website doesn't help. Any advice appreciated. Nick
Question
•
PowerVault
Community Accepted Solution
Closed
Hello can somebody give me link to download emcopy ? After 1h search i cant find it
Question
•
Unity
Community Accepted Solution
Closed
We've got 2 PowerVault MD3600f SANs that have previously only been connected to 2 different servers via Fiber only without any of the Ethernet management ports being used. We want to use the 2 SANs (properly this time) using a Fiber switch to connect to 2 servers we are going to cluster. I'm new t
Question
•
PowerVault
Community Accepted Solution
Closed
Hey guys, I'm not sure how to connect and define the iSCSI IPs in a scenario with 2 hosts with 2 ports each, directly connected to the ME5.In the deployment guide (https://dl.dell.com/content/manual51896558-dell-powervault-me5-series-storage-system-deployment-guide.pdf?language=en-us), it shows the
Question
•
PowerVault
Community Accepted Solution
Closed
Hi All, Just to asking. Any UAT document for PowerStore that can shared with me or any resources that I can find it? Please advise on this. Thanks Regards, Zulhadi
Question
•
PowerStore
Community Accepted Solution
Closed
I have several UFS64 filesystems on my Unity-680, all presented to the clients as SMB shares. On another server I have a script that I need to run each time a new file is created on the filesystems. On a "normal" linux server I could have used inotify to monitor the creation of new inodes. What a
Question
•
Unity
Community Accepted Solution
Closed
Hello, all community contributors. I have Unity 300 Storage and want to change its ssh service port 22 to something else. I've already read 'Dell Unity™ Family Security Configuration Guide' but it said nothing but lists of all using ports in unity 300. (https://dl.dell.com/conten
Question
•
Unity