Search

Hello, A little help on this would be appreciated. Running latest OME. Have a Dell XC740xd server that adds to inventory fine, but I cannot get the Firmware/drivers tab to appear. If I add the server under HCI group to my firmware baseline and run the baseline, the server does not appear there. I

Here is the scenario. OME version is 3.10. IDRAC firmwares are 2.83.83.83 for IDRAC8, and 6.10.30.00 for IDRAC9.  The issue I'm seeing in OME is that the device names are not showing up the same. IDRAC8 device names are showing up as the FQDN that I expect, and if I do a dump of the basic devi

Is there any way to delete a rack in the Power Manager plugin? I was trying to get the rack names consistent, but now racks for both the old name and new name are listed. So far I haven't found a way to delete the old rack.

We have an older, and a brand new DSS 8440. OME says for both "Update file not in catalog"Is there something I need to add, to get these two hosts included, or is this a fault on the Dell end? The last catalog update was downloaded by OME, had a creation date of Feb 27 2023  

Hi, I'm wondering if I can switch from a 100-1000-10000 switch to a 1000-10000 switch. So is the dedicated iDRAC NIC 100 or 1000 Mbe bandwidth? Thank you.

OME has been a great help with firmware upgrades, and everything upgrades just fine, but these three packages always show as compliance unknown and "update file not found in catalog." Should I be worried that none of my servers are getting updated with these?

I'm running OME v.3.10.0 (Build 169) and managing hosts on two different network segments. OME's primary IP is on the same network as some of the hosts. The secondary networks is available through a manually added route. OME can find and see the status of all the hosts on both segments. I can creat

I just purchased the PowerEdge T150.The server still has no OS installed.I plan to install Ubuntu Server 22.04 LTS.I started the server and, following the leaflet that came in the box, I set up the Lifecycle Controller.No problems, all worked well. Next I am advised to update the firmware.I could u

All our servers are PowerEdge range servers in various locations and we would very much like to manage driver updates and reports using SCCM. There are plenty of information available on how to do this for desktops and laptops, but not enough information for servers. Is there a guide available som

Hi, I am trying to make some simple web application that get system status using redfish api through iDRAC port. I can test some redfish apis through iDRAC port(we assigned ip to iDRAC and can access through ip) using insomnia tool(rest api test tool). but when I call them in web application(react,

For system inventory, I currently use WSMAN to the idrac to retrieve DCIM view information. These DCIM class are examples: DCIM_MemoryView, DellDCIM_NICView, DellDCIM_PowerSupplyView, DellDCIM_PhysicalDiskView. I do not use WSMAN for much more than inventory of the DCIM view classes. According to

Hello,   Just updated OME to the latest issue and having issue with iDRAC firmware baseline for R940 servers. It shows a very old version, while all other firmware versions are latest available:   However, same baseline for R840 server shows correct iDRAC version available to upgrad

Hi, is it possible to change the Subject Information fields for self signed SSL certificate in iDRAC?

Hello, I have been given a Dell PowerEdge T410. I have been updating everything I could from it, but I got stuck in the Lyfecycle. It currently has version 1.5.1.57 and I would like to update it to the latest version, 1.7.5. I downloaded version 1.5.2.7 first to try to do it gradually, but it tells

Hello, I am looking at enabling the action to power off the server if the Critical temperature is breached on a few servers that are in a space with frequent cooling issues. Does anybody know which temperature threshold this action references (inlet temp,exhaust temp,cpu). Looking at System Settin

After upgrading to 3.10.0 a lot of devices show up with ip address instead of host name.I have run discovery several times but still most devices show ip address, but not all.The Discovery settings is set to : General Device Naming:DNS - Server Device Naming: System Hostname. I have tried to delete

Hi All, I have doubts with regards to "Management Station". 1. What is Management Station and its functions? 2. Why do the firewall rules port 25 and 53 destinations to Management Station? Based on my understanding port 25 destination should be directed to SMTP server and port 53 to a DNS serv

after I upgrade to latest OME 3.10 and probably update to the latest DELL online catalogue (downloads.dell.com/catalog/catalog.gz - Version: 23.02.03) I get an "Update file not in catalog; Check dell.com/support" for all my x720/x620 servers. They are gone from dell online catalogue or it is an iss

I am looking to upgrade some older servers. Those are ESXi hosts Dell PowerEdge R630's. We are currently on BIOS version: 2.1.7, Firmware version: 2.21.21.21, and  Lifecycle Controller firmware: 2.21.21.21. What would be the path to get those current?  Thanks.

I'm having trouble getting some Dell network switches to be detected properly in OME.  Since they're network switches, monitoring is done with SNMP.  I've created the Community String on the switch, and initial Discovery goes fine in OME.  However, within a few hours usually, the swit