Search Results (503)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hi Dear Community I want to know how to determine the Brocade Switch Model and Dell-EMC Model on the output that I got from the "switchshow" (SwitchType=162.6) I just want to find out something like that https://kb.netapp.com/onprem/Switches/Brocade/What_is_the_basis_on_which_Brocade_switch_mod
Question
•
Connectrix
Community Accepted Solution
Closed
Hi All, I have recently added 2 new Brocade 6520 Switches into the fabric, i can login them and when ran Fabricshow command it's showing all the switches in the Fabric, also i can see these in the BNA Switch Group on Both the Fabrics,. But the new Switches status bar showing as "Not Reachable", al
Question
•
Connectrix
Community Accepted Solution
Closed
Hi Support, we have 2 Data centers(DC1 and DC2) the ISL is connected between DC1(16G-SAN Switch) << to>> DC2 (8G-SAN Switch), now i want to replace 8G Switch with 16G. ON DC2 8G SAN Switch got another 2 Switches connected (via ISL). The same setup at Fabric A and Fabric B. i am planni
Question
•
Connectrix
Community Accepted Solution
Hi, I am trying to figure out which is the WWPN for soft zoning. Not sure why Brocade couldn't standardize their output using WWPN & WWNN instead. I am assuming the WWPN is the PermanentPort Name because that's the only WWN that allows me to use when I run a nodefind 10:00:00:05:33:21:4a:a
Question
•
Connectrix
Community Accepted Solution
Hello, maybe someone else had that too, i have the Problem that a lot of my host ports are created into 2 Hosts instead of one which leads to Path Errors in the Dashboard. So i want to turn of the Auto Enclosure Feature, but i cant find the Username for the Database, the Standard Password i can
Question
•
Connectrix
Community Accepted Solution
Hi All, I'm looking for the Connectrix visio stencils. Can someone help me out ?
Question
•
Connectrix
Community Accepted Solution
Hi i am migrating from Brocade 6510 to 7720, i have been searching but cannot find out if having the old switch on firmware version 8.1.2j and the 7720 on 9.0.1a is supported so the zone information can flow from the old switch to the new? also if anyone has some information or guide how to con
Question
•
Connectrix
Community Accepted Solution
Hello, I receved several 32Gbps Transceivers with the Feature Key Activation. When I try to access the website [https://fusion.emc.com/assetMgmt/] to generate the licence file, sometimes I get HTTP error 400, another times there is no place to submit any information at all. I don´t know what to do
Question
•
Connectrix
Community Accepted Solution
upgrade 6505B firmware from 8.0.2d to 8.1.2c currently, connected to ISL with 7.4d version will there be an issue? what is need to be considered? glad if someone will help with this.
Question
•
Connectrix
Community Accepted Solution
Hi all, I got a output below. porterrshow : frames enc crc crc too too bad enc disc link loss loss frjt
Question
•
Connectrix
Community Accepted Solution
Hi everyone, we had some new Connectrix ED-DCX7-8B and I installed SANnav Appliance. I have an issue to generate a supportsave to the SANnav. Failed to generate supportsave for the switch xxx. Reason xxx :Exception while trying to create the switch specific folders under 'technical
Question
•
Connectrix
Community Accepted Solution
Hi everyone, We have an old version of CMCNE running on our infrastructure (CMCNE 14.0.1) and I can't add my new Brocade sanswitches due to error : "Unmonitored: Discovered - Authentication Failure : Not registered for SNMP Traps" I checked the SNMP config and credentials but I can't find anyt
Question
•
Connectrix
Community Accepted Solution
Hi, We have two cabinets in a data center populated with servers. One cabinet has our SAN and 2 DS-300B switches and servers connected to the fiber network. We would like to connect the 8 servers that are in the other cabinet. I think we have two choices: * Run 16 fiber xconnect cables between the
Question
•
Connectrix
Community Accepted Solution
Hello All, What steps to follow to diligently add 23 port line card to empty slot in MDS 9509?
Question
•
Connectrix
Community Accepted Solution
Hello All, What steps to follow to diligently Add 32 port line card to empty slot in 9509 MDS switch?
Question
•
Connectrix
Community Accepted Solution
Hi, I'm trying to use a TACACS solution to authenticate users on the CMCNE tool. When I test the connection with the ACS, I have an error saying that the authorization is failed. On the ACS side, I only see that the authentication is successful. Does anybody know if there are specific conf
Question
•
Connectrix
Community Accepted Solution
I have two new Brocade Switch 6520, acting as standalone, i wont merge those The default domain id is 1 I want to learn about the best practices to set the domain id for standalone switches, is there any advice to about brocade 6520 domain id must be greater o smaller than others? for example
Question
•
Connectrix
Community Accepted Solution
Hello, I need help for merging 2 switches where VF needs to be disabled. Below is our current Brocade switches configuration; Model: Brocade 6520 Switches: Switch_1 Switch_2 Zoning: Soft VF > Enabled 1) FID: 128 > cfgzone: Not Defined > Fabric: n/a
Question
•
Connectrix
Community Accepted Solution
Hi experts, Can i ask several questions regarding Brocade FC-FC Routing ? 1. Can I implement FC-FC Routing between two NO Virtual Fabrics-capable switches ? Or between one Virtual Fabrics-capable switch and one NO Virtual Fabrics-capable switch? Since the NO Virtual Fabrics-capable edge swi
Question
•
Connectrix
Community Accepted Solution
hi everyone, I have inherited a EMC vdx-6740b and I've started looking at, the firmware of course, checking if there is a newer version. Latest firmware I can find is Network OS 6.0.2e which seems quite behind what I find at brocade/extremenetworks sites and I wonder if.. a) has EMC neglected thi
Question
•
Connectrix