Search Results (265)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I have a SCv3020 with six 450GB SSD and sixteen 1TB 10k drives. When I create a Storage Type, I set the Tier 1 SSD's and Tier 3 10k drives both to Dual Redundancy. After doing so, I receive an alert: Storage type Assigned - Redundant - 2 MB tier High has insufficient disks to support parity raid. T
Question
•
Compellent
Community Accepted Solution
Hello. i have an issue with a controller in dell scv2020. i tried to replace the faulty controller but when replacing it with another controller the new controller is not recognized. any ideas?
Question
•
Compellent
Community Accepted Solution
Hey all - We have a pretty old Compellent system (SC40), I was wondering if there was any way to set up an NFS share directly from it?
Question
•
Compellent
Community Accepted Solution
Is there a way to delete removed / missing drives? Unit is out of warranty. I am trying to set it up in my lab... not production. I have most of the original drives and it can boot fully. My issue is that it originally had an SSD tier (I don't have any of the SSD drives). W
Question
•
Compellent
Community Accepted Solution
I have a customer with 2x SC5020s replicating using Live Volume. During initial setup they only had enough free SAN Ports to connect 2 ports of each controller. The controllers have 4 FC ports each.We configured the Fault Domains 1 and 2, each with one port from each controller. Everything works fin
Question
•
Compellent
Community Accepted Solution
Hi team I've a customer looking to upgrade his current CML Storage with the following : 2x SSD 960Go additional for Dell Compellent SC2020 ( TAG :Removed by Moderator ) 2x HDD 4To additional for Dell Compellent extension enclosure ( TAG :Removed by Moderator) Many thanks for your confirma
Question
•
Compellent
Community Accepted Solution
Hello! Does the SC5020 support the transfer of software backups and configuration files using SFTP or SCP?
Question
•
Compellent
Community Accepted Solution
We have a Dell Compellent (not sure exactly what Series, but it's a model EB-2425) that currently has 12 disks in it - 6 x 146 GB 15K RPM disks (one of which is a spare) and 6 x 1 TB 7K RPM disks (one of which is ALSO a spare). According to the dialog from "Help" > "Licensed Features", we are lic
Question
•
Compellent
Community Accepted Solution
The system: SCv3020 with FC front-end and actual firmware. Each controller has one extension slot free. The goal is: add the iSCSI connectivity front-end card without storage service interruption. The plan looks not hard technically: - Check the FC multipathing; - Shut down first sub-controller
Question
•
Compellent
Community Accepted Solution
Hello, I have 2 Dell S4128 Switches that are interconnected via VLT. We use these switches with our servers and they are top of the rack switches for me, Dell SC documents states that switches do not need to be Interconnected, and that the fault domains need to be in a diffe
Question
•
Compellent
Community Accepted Solution
We are running two SC7020 and we are also utilizing Live Volume on most of our Volumes. Each SC7020 is also used with active VM's operating off each SC7020. Live Volumes xcross over both SC7020.. I have read that all writes will first be written too tier 1 storage, does this apply to the live Volume
Question
•
Compellent
Community Accepted Solution
First of all, my english is not that great. Please cut me some slack (is this right??) Recently I am managing sc200 and found a down disk the other day. Before replacing the disk, there is no word for rebuilding in the sc series documents. However, there is a word rebalance in the sc series docume
Question
•
Compellent
Community Accepted Solution
Sorry for disturbance, is this enough to initaite the Service Request, or I ought to check something more in the SCv3000 storage? Now the DSM and Unicphere WEB-console reporting the storage health is OK, no unchecked/uncleared alerts. BUT, the 'fault indicator' still flashes yellow. The system repo
Question
•
Compellent
Community Accepted Solution
Hello All, I have 2 Compellent SC4020's in different sites. they are configured with a replication link outside of my other networking. I have 2 vmware clusters one connected to each san in a non-uniform method. I have configured one of my volumes to live migrate from one san to another. This volum
Question
•
Compellent
Community Accepted Solution
I have configured Dell EMC SCv3020 connect with S4148U-On via 16Gb fiber channel. But I have received the error message "no ports are cabled" So let me know which configuration need to configure in S4148U-On.
Question
•
Compellent
Community Accepted Solution
Hi Folks Currently, my customer have 2 SC4000 are managed by Data Collector to Replicate Volume. But now they forgot the password of Data Collector that installed in Window Server. so my question is how can we remove Data Collector out of SC4000 to we can configure new Data Colletor. tha
Question
•
Compellent
Community Accepted Solution
Customer owns an SC4020 system with JBOD expansion shelf, almost full of 900GB 10KRpm drives. Today Customer bought a pack of drives to complete the storage fill, and asked for help to assign all drives without payload as hot-spare drives at his main disk folder "Assigned". However, the appropriate
Question
•
Compellent
Community Accepted Solution
Hi Guys, I need help here. We have SC220 enclosure and 1 of the 15K disk had critical temperature alert spamming all the time. So we thought the disk might have failed, and we got replacement same model harddisk(not direct from Dell) which is identical to this failed disk. My bad, I didn't release
Question
•
Compellent
Community Accepted Solution
I'm configuring CHAPs between an SCv3020 and vCenter/ESXi servers. In the CHAPs configuration dialogue on the SCv3020 it says "Changing CHAP settings will cause existing iSCSI connections between SAN systems using this fault domain to be lost. Use the Configure iSCSI Connection wizard under Storage
Question
•
Compellent
Community Accepted Solution
Hello, I am currently having an issue trying to connect our SC220 to an H810 Controller mounted in our PowerEdge 730. The error states - RAC0505: There are no devices to be displayed. 1. Check if the host system is ON. 2. Check if the Storage Enclosure is ON. 3. Verify that the adapter
Question
•
Compellent