Search

We have an older, and a brand new DSS 8440. OME says for both "Update file not in catalog"Is there something I need to add, to get these two hosts included, or is this a fault on the Dell end? The last catalog update was downloaded by OME, had a creation date of Feb 27 2023  

I'm running OME v.3.10.0 (Build 169) and managing hosts on two different network segments. OME's primary IP is on the same network as some of the hosts. The secondary networks is available through a manually added route. OME can find and see the status of all the hosts on both segments. I can creat

Hello,   Just updated OME to the latest issue and having issue with iDRAC firmware baseline for R940 servers. It shows a very old version, while all other firmware versions are latest available:   However, same baseline for R840 server shows correct iDRAC version available to upgrad

After upgrading to 3.10.0 a lot of devices show up with ip address instead of host name.I have run discovery several times but still most devices show ip address, but not all.The Discovery settings is set to : General Device Naming:DNS - Server Device Naming: System Hostname. I have tried to delete

Hi All, I have doubts with regards to "Management Station". 1. What is Management Station and its functions? 2. Why do the firewall rules port 25 and 53 destinations to Management Station? Based on my understanding port 25 destination should be directed to SMTP server and port 53 to a DNS serv

after I upgrade to latest OME 3.10 and probably update to the latest DELL online catalogue (downloads.dell.com/catalog/catalog.gz - Version: 23.02.03) I get an "Update file not in catalog; Check dell.com/support" for all my x720/x620 servers. They are gone from dell online catalogue or it is an iss

So here is the scenario. I've got 100+ iDRAC devices in OME that need their root passwords changed. From my searching it seems like the procedure is to change the password at the iDRAC (racadm, powershell, ansible, etc.), remove the devices from OME, then rediscover them back into OME. Is that still

Hi all, I am trying to update a R620 with OME but inventory process fails. "Inventory detals were not provided by device". OME version is 3.9.0 Server iDRAC version is 1.57.57 Regards,

Hello, i see several problems after upgrade to 3.9.2.9 to 3.10.0.169. BuildIn Admin user now has the role "Backup Administrator", but role "Backup Administrator" did not exist for new users. Prior to the upgrade i renamed the "Default Inventory Task", after the upgrade i now have a new "Default I

Hi All, Hoping to get some help on this one.  DNS settings are correct and authentication and directory services have been configured, but for some reason i cant resolve any DNS names from the appliance.  Version 3.9.0 (Build 55) Regards

I have an OME 3.6.1 VM (Hyper-V), which I'm trying to bring up to current version. Entire system is firewalled, and has no internet access, so this has to be an Offline update.  I realize this will need to be several hops, so I've downloaded every version between 3.6.2 and 3.10.0 from htt

Same question posted in another section (modified by moderator)

Hello, Since a few weeks now (can't really find out when), for my x30s, there is a very old firmware "downgrade" proposed by Dell OME : I found a newer one available since December 2022 but it doesn't show up and anyway, such a downgrade is my opinion not OK : https://www.dell.com/support/

Hi Team .. Service Tag could not be verified while updating firmware. we have done the 2 proccess below: 1- enabled V1 in the Appliance share setting 2- updated BIOS & Idrac manually we still facing same issue. Br/ Khiyar Issa

Hi, today I've noticed that for all of my yx2x systems firmware is not available. There is an info that update file not in catalog. According to support matrix that hardware should be supported. Last week everything was fine and I was able to update yx2x systems. Do you know what is going on?

Hello, I´m trying to deploy a Profile for Dell Poweredge R740 Server. I´ve discovered the template automatically from a reference server and then putted into a new profile. The Profile is available but when I try to deploy it, there is no target device available for selection. I can see only empty

Hello , When i try to register the register the Service Plugin from OpenManage Enterprise first i see an Window where i have to fill out an Access key and an PIN . But i dont have this Informations .  Therefore i choose "Generate Access key and PIN" , then i was redirected on an Website .&nb

OME 3.9 (Build 55),  Discovery for IDRAC with WSMAN.   All old servers (R620) were discovered with no problem.  all new servers (R650, R640, R630) failed.   Unable to perform the requested action because the device management endpoint authentication over WSMAN, REDFI

Hi Dell Community, My customer is deploying Dell OpenManage Enterprise software. But CentOS is forbidden in their data center as the security issue of OS, other OS can be permitted. I would greatly appreciate any help with the following questions. Thank you in advance. Do we offer only software o

How to close the admin account of openmanage