Unsolved
This post is more than 5 years old
12 Posts
0
37368
October 7th, 2007 07:00
AHCI/ATA/SCSI differences?
I have been looking through my settings and I'm confused about what mode I should use for my computer. I know RAID configuration should be used for 2 hard drives, but what is the recommended configuration I should use for only 1 hard drive?
Thanks
0 events found
No Events found!
shesagordie
12 Elder
•
46K Posts
0
October 7th, 2007 17:00
Which computer model?
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
shesagordie
12 Elder
•
46K Posts
0
October 8th, 2007 00:00
If you are using one hard drive and not RAID.
Enter the setup and change the SATA operation mode to "RAID Auto/ATA" press ESC to save and exit.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
doggiekid
12 Posts
0
October 8th, 2007 00:00
shesagordie
12 Elder
•
46K Posts
0
October 9th, 2007 03:00
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
doggiekid
12 Posts
0
October 9th, 2007 03:00
jenady
13 Posts
0
October 12th, 2007 02:00