The VDs are small in this case, only about 135GB. racadm can see both of them on the boot list but it identifies them both with the same name so there is no way to differentiate them.
BTW if I change to BIOS boot mode then only the first VD is available for boot and shows up as drive C: in the boot list. The second VD is not visible.
cameronredux
2 Intern
•
615 Posts
0
June 16th, 2016 10:00
Are your virtual disks larger than 2TB?
If not you may need to change your boot mode to BIOS and then you can choose the number from the HddSeq list.
I may be totally wrong here so please take this with a grain of salt :)
Here is the racadm CLI manual:
topics-cdn.dell.com/.../idrac7-8-lifecycle-controller-v2.30.30.30_Reference Guide4_en-us.pdf
Search for the BIOS.BiosBootSettings section
laxtonp
2 Posts
0
June 16th, 2016 17:00
The VDs are small in this case, only about 135GB. racadm can see both of them on the boot list but it identifies them both with the same name so there is no way to differentiate them.
BTW if I change to BIOS boot mode then only the first VD is available for boot and shows up as drive C: in the boot list. The second VD is not visible.
vDEV9999
1 Rookie
•
4 Posts
0
December 8th, 2019 02:00
I am getting 404 error for the link provided.