
UNSOLVED
Equallogic PS6100 not Start after power failure
I have problems starting Equallogic in my production environment.
Please somebody help
Thanks!!!!!!!
#########################################################
# #
# Dell (tm), Inc. Storage Array #
# Copyright 2001-2011 #
# #
# Controller Information: #
# Part=70-0477 Rev=A00 SN= 13740028U000S ECO=C00 #
# #
#########################################################
Bootloader Version 3.9.1 (SWINT Rev:1)
Compiled on Wed Nov 16 14:22:40 EST 2011
(type h for help)
Enter Ctrl-P for boot prompt
Executing bootcmd0 [dload sd primary/eqlstor.gz]
0X80231000/11912 0X85f08100/40013432 entrypt 80231000
Executing bootcmd1 [run]
cpu_online_map=ffff, userapp_cpu_map ffff
psb_os_active_mask=0, psb_os_mask=0
boot1_info: userapp_cpu_map=ffff, psb_os_cpu_map=0
cpu_online_map = 0xffff
Jumping to the application... 0x80231000
------------------------------------------------------------
Preparing ffff bitmask of cpus to run
No network device to cleanup
count = 16, total = 16
All slave cpus (16) ack'ed userapp init
count = 4, total = 4
All slave cpus (4) ack'ed message ring init
Dell Inc. Storage Array
Copyright 2001-2015 Dell Inc.
SP:1.01:mips_pss_init.c:363:INFO:28.2.107:Control module in slot 0 with serial number CN-09PDDY-13740-28U-000S is designated as active.
MFS set up
Building databases...
SP:1579818120.94:emm.c:1333:INFO:28.2.6:Enclosure serial number: CN-0WK7G2-70821-25L-05P5-A01.
Restoring password file...
SP:1579818126.27:emm.c:2363:ERROR:28.4.47:Critical health conditions exist.
Correct immediately before they affect array operation.
Critical hardware component failure.
There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
SP:1579818126.27:emm.c:355:ERROR:28.4.85:Critical hardware component failure, as shown next.
C2F power module has insufficient hold time.
SP:1579818126.27:cache_driver.cc:1056:WARNING:28.3.17:Active control module cache is now in write-through mode. Array performance is degraded.
Thu Jan 23 17:22:14 EST 2020
Jan 23 17:22:14 init: kernel security level changed from 0 to 1
PS Series Storage Arrays
Unauthorized Access Prohibited
login: SP:1579818138.94:emm.c:2363:WARNING:28.3.51:Warning health conditions currently exist.
Correct these conditions before they affect array operation.
Control module was removed from array.
There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
SP:1579818138.94:emm.c:1435:ERROR:28.4.50:Control module in slot 1 is not functioning or not installed.
MgmtExec:1579818142.83:IoManager.cc:452:ERROR:7.4.1:No valid storage pool found.
Responses (0)
Solutions (0)
