Hi,
I have a Dell PowerEdge 610 server.

I have just connected it to my LAN and I can't connect to it using Web Interface due to there is a certificate issue. I connected using SSH with success. From CLI I have gotten these informations:

/admin1-> racadm getsysinfo

RAC Information:
RAC Date/Time = 10/03/2020 14:39:08
Firmware Version = 1.30
Firmware Build = 24
Last Firmware Update = 01/23/2010 06:47:46
Hardware Version = 0.01
MAC Address = 00:22:19:68:a5:01

Common settings:
Register DNS RAC Name = 1
DNS RAC Name = iDRAC
Current DNS Domain = company.local
Domain Name from DHCP = 0
IPv4 settings:
Enabled = 1
Current IP Address = 172.29.100.92
Current IP Gateway = 172.29.100.1
Current IP Netmask = 255.255.255.0
DHCP Enabled = 0
Current DNS Server 1 = 172.29.40.11
Current DNS Server 2 = 172.29.40.12
DNS Servers from DHCP = 0
IPv6 settings:
Enabled = 0
Current IP Address 1 = ::
Current IP Gateway = ::
Autoconfig = 1
Link Local IP Address = ::
Current IP Address 2 = ::
Current IP Address 3 = ::
Current IP Address 4 = ::
Current IP Address 5 = ::
Current IP Address 6 = ::
Current IP Address 7 = ::
Current IP Address 8 = ::
Current IP Address 9 = ::
Current IP Address 10 = ::
Current IP Address 11 = ::
Current IP Address 12 = ::
Current IP Address 13 = ::
Current IP Address 14 = ::
Current IP Address 15 = ::
DNS Servers from DHCPv6 = 0
Current DNS Server 1 = ::
Current DNS Server 2 = ::

System Information:
System Model = PowerEdge R610
System BIOS Version = 3.0.0
Service Tag =
Host Name =
OS Name =
Power Status = OFF

Embedded NIC MAC Addresses:
NIC1 Ethernet = 00:22:19:68:a4:f9
iSCSI = 00:22:19:68:a4:fa
NIC2 Ethernet = 00:22:19:68:a4:fb
iSCSI = 00:22:19:68:a4:fc
NIC3 Ethernet = 00:22:19:68:a4:fd
iSCSI = 00:22:19:68:a4:fe
NIC4 Ethernet = 00:22:19:68:a4:ff
iSCSI = 00:22:19:68:a5:00
Watchdog Information:
Recovery Action = None
Present countdown value = 15 seconds
Initial countdown value = 15 seconds

I have tried to renew certificate using this commands without success.
racadm sslresetcfg
racadm racreset soft

How can I solve it? It is really important for me.
Thanks!

Pinned Posts

IDRAC 2.70.70.70

Rack Servers

PowerVault NX3100 - BIOS update error - "The update package is invalid for current system."

Configuration of DRAC 4 on PowerEdge R200 not appear in BIOS, just the regular CTR+E BMC

WOL on in 15G server, esx windows and linux

R710 SAS Drive Firmware update ST33000650SS disk

Dell R900 Fan Speed control allways on MAX speed and PowerConsumption 1175Watts

Dell power edge M610 OS installation

Dell Poweredge R740 SFP-10G-SR-85C is not wokring

BIOS and iDRAC upgrade paths for R610

How to downgrade DELL Windows Server 2019, Standard, ROK - 16 Cores 2VMs to 2016 edition

DELL R610 Upgrade Memory

Dell PowerEdge 2900 Server upgrading BIOS & Firmware without OS

PowerEdge R640&R740: eventService vs SNMP traps

BIOS FVS MODE ENABLED R730

R520 memory configuration.

iDRAC 6 I cant' renew SSL certificate

Latest Solutions

48GB RAM

PowerEdge XR5610

Dell R640 won't POST, no VIDEO

Secure Boot Error After NIC Firmware Upgrade

Impact of operating servers above the recommended temperature

Dell Support Resources