It needs to be in DMA mode. Change it to DMA and if it reverts back to PIO mode, Review this article; it includes a utility to force it to DMA mode ..............
Check that your drive is in DMA mode and not PIO mode here .......
Start | Control Panel | System in classic view | Hardware tab | Device Manager
Click on the (+) next to IDE ATA/ATAPI controllers. Right-click the channel the DVD drive is on and select Properties. Click the Advanced Settings tab.
Skybird
10.9K Posts
0
February 11th, 2007 23:00
to PIO mode, Review this article; it includes a utility to force it
to DMA mode ..............
http://www.michna.com/kb/WxDMA.htm
kspirit
27 Posts
0
February 11th, 2007 23:00
Skybird
10.9K Posts
0
February 11th, 2007 23:00
Start | Control Panel | System in classic view | Hardware tab | Device Manager
Click on the (+) next to IDE ATA/ATAPI controllers. Right-click the channel
the DVD drive is on and select Properties. Click the Advanced Settings tab.
kspirit
27 Posts
0
February 11th, 2007 23:00
kspirit
27 Posts
0
February 11th, 2007 23:00
Skybird
10.9K Posts
0
February 12th, 2007 00:00