I was fixing to log out but thought I would reply to one of the old original SP Gang. It is possible the article on the filter will correct the problem. Many people have only had the lowers and no Uppers. Also many have not had o reinstall their burning software, unfortuantly others have had to, no set pattern as to why.
To cover the basics, you do have both drives set to Cable Select or one Master the other Slave; both drives are turned on the BIOS, correct?
Best Regards!
God, grant me the senility to forget the people I never liked anyway, the good fortune to run into the ones I do and the eyesight to tell the difference. CD/RW Link
Hi Jeff I have been doing Ok. Thanks for answering my post, I saw your post about heading to germany so I figure you wouldn't be the one to reply. I hope you enjoy Germany, have a save trip.
Both drives are set to cable select. The DVD-Rom works fine until the drivers just un-install. I'll try deleting the lower filter and up grading Nero.
Predator
2 Intern
•
15.3K Posts
0
May 8th, 2007 12:00
Hi Marvin how have you been !!
I was fixing to log out but thought I would reply to one of the old original SP Gang. It is possible the article on the filter will correct the problem. Many people have only had the lowers and no Uppers. Also many have not had o reinstall their burning software, unfortuantly others have had to, no set pattern as to why.
Nero also has driver they have placed on their web site that is suppsoe to hlp, I will list it here:
http://www.nero.com/nero7/eng/WNASPI32.DLL.html
To cover the basics, you do have both drives set to Cable Select or one Master the other Slave; both drives are turned on the BIOS, correct?
Best Regards!
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link
Message Edited by Predator on 05-08-2007 09:22 AM
Marvin P
1.3K Posts
0
May 8th, 2007 14:00