Unsolved
This post is more than 5 years old
2 Posts
0
11472
PE M600 Boot from Iscsi SAN - Dell EqualLogic PS-array support
Hi,
Is booting from the MD1000e / M600 Bladeserver (using on board Broadcom chip set ) to an Dell PS-5xxx series iscsi san supported today. Looking to boot VMware OS off of iSCSI SAN volume.
Regards,
Matt
Bala Chandrasek
57 Posts
0
October 2nd, 2008 14:00
Hello Matt, Welcome to the Dell Forums !
No, booting VMware ESX Server off an iSCSI volume in M600 is not supported today.VMware only supports booting from iSCSI using hardware initiators.
Bala.
Mark_A_Smith
2 Intern
2 Intern
•
829 Posts
0
October 23rd, 2008 17:00
I have really got to get back to these forums a little more often.
Dell supports boot from iSCSI: http://support.dell.com/support/edocs/network/BFi/
Bala Chandrasek
57 Posts
0
October 23rd, 2008 18:00
Not on VMware ESX.
VMware ESX only supportes boot from iSCSI from H/W initiators. Dell does not OEM hardware initiators.