Thansk for the reply. yep i followed those instructions to get the DVD out no problem them i got stumped at the next part as their is a metal casing for where the floppy drive bay is. Heres a pic of the area that ive circled in red.
Not sure if you found a solution to this yet, but the blue lever which releases the optical drive, releases that plate. Just pull up hard while simultaneously pulling towards the back of the system on the plate and it should release. Took me awhile to figure it out too.
osprey4
4 Operator
•
34.2K Posts
0
June 29th, 2009 17:00
Hi, Grafology:
See if these instructions help.
Yes, the "*** filter" is a bit sensitive to certain words. Believe it or not, it used to be worse.
grafology
3 Posts
0
June 30th, 2009 04:00
Hi osprey.
Thansk for the reply. yep i followed those instructions to get the DVD out no problem them i got stumped at the next part as their is a metal casing for where the floppy drive bay is. Heres a pic of the area that ive circled in red.
http://img222.imageshack.us/img222/5071/dscn4380h.jpg
any ideas?
grafology
3 Posts
0
July 2nd, 2009 18:00
So no ideas?
osprey4
4 Operator
•
34.2K Posts
0
July 3rd, 2009 07:00
Your picture is good but I can only go by what the manual shows. The insert should be removable.
sla161
5 Posts
0
September 3rd, 2009 16:00
Not sure if you found a solution to this yet, but the blue lever which releases the optical drive, releases that plate. Just pull up hard while simultaneously pulling towards the back of the system on the plate and it should release. Took me awhile to figure it out too.
ylevy
1 Message
0
March 6th, 2013 13:00
I signed up for the forum just to say thanks to sla161 for this. I was stumped by this insert too. Kudos!