Your manual <ADMIN NOTE: Broken link has been removed from this post by Dell>shows the system supports two hard drives, but you might have to sacrifice the CD drive. Alternatively, an external hard drive would seem to be the way to go. This is the desktop model. Is that what you have?
All of your questions are answered on that page. Does that help?
Thanks for this documentation osprey4, I looked at it before but didn't bother to scroll down to the bottom re: hard drive installation. You will notice the document says an optional second hard drive can be installed, but it did not mention the module bay (or whatever that bay is) where the floppy disk drive can be and there is a space (between the lower HDD and upper CDRW) where I can install it. I have no floppy disk drive and there is some space between the lower master HDD and the upper CDRW, and I want to use it if possible for a second HDD. The problem is the documentation does not mention how or what pieces are required to get this done, and I can't find the information anywhere else on the internet. Does anyone know how?
Now I'm wondering if it is proper to just simply install 4 screws into the sides of the HDD (similar to the floppy disk drive installation instruction) and slide this in the rails of the floppy bay? I can't seem to find any other way to do this. If anyone has better ideas, I'm all ears.
It has been mounted the floppy disk way and it seems to work! I had to reconfigure the bios setting and format the disk, so everything seems good! Thanks!
osprey4
4 Operator
•
34.2K Posts
1
December 13th, 2009 14:00
Hi, truffy:
Your manual <ADMIN NOTE: Broken link has been removed from this post by Dell>shows the system supports two hard drives, but you might have to sacrifice the CD drive. Alternatively, an external hard drive would seem to be the way to go. This is the desktop model. Is that what you have?
All of your questions are answered on that page. Does that help?
truffy
9 Posts
1
December 14th, 2009 08:00
Thanks for this documentation osprey4, I looked at it before but didn't bother to scroll down to the bottom re: hard drive installation. You will notice the document says an optional second hard drive can be installed, but it did not mention the module bay (or whatever that bay is) where the floppy disk drive can be and there is a space (between the lower HDD and upper CDRW) where I can install it. I have no floppy disk drive and there is some space between the lower master HDD and the upper CDRW, and I want to use it if possible for a second HDD. The problem is the documentation does not mention how or what pieces are required to get this done, and I can't find the information anywhere else on the internet. Does anyone know how?
osprey4
4 Operator
•
34.2K Posts
1
December 14th, 2009 16:00
If the floppy bay is available, then it shouldn't be too difficult to fit it in there.
Just a bit of ingenuity on your part and a couple screws should do the trick. :emotion-2:
truffy
9 Posts
1
December 16th, 2009 08:00
Now I'm wondering if it is proper to just simply install 4 screws into the sides of the HDD (similar to the floppy disk drive installation instruction) and slide this in the rails of the floppy bay? I can't seem to find any other way to do this. If anyone has better ideas, I'm all ears.
truffy
9 Posts
1
December 17th, 2009 03:00
It has been mounted the floppy disk way and it seems to work! I had to reconfigure the bios setting and format the disk, so everything seems good! Thanks!
osprey4
4 Operator
•
34.2K Posts
2
December 17th, 2009 05:00
Hi, Truffy:
Excellent! Glad you've got the new drive up and running.
raza2710
3 Posts
0
June 29th, 2015 00:00
Hi there !
I want to add 1TB hard drive (SATA) . my system is Dell optiplex gx 620 small form factor .
please guide me my pc support two hard drives or not ??? if not then what should i do ??