Unsolved
This post is more than 5 years old
9 Posts
0
10666
Headphone Jack Works But No Audio From Speakers: Replaced the audio jack and sound still not working
Basically the sound wasnt working because i stood on the wire and broke the audio jack on My Studio 1737, I did the diagnostics and came to the conclusion that it must have been failed sense pin in the audio jack, so i have replaced the audio jack board with a new one, i still have the same problem that the speakers wont work work, but will work in the audio diagnostics and passes all tests what can i do about this?
Jim Coates
4 Operator
4 Operator
•
13.6K Posts
0
July 5th, 2011 12:00
I would try it both with the IDT audio driver and the Windows basic driver. I would double check the connections. If no luck I would suspect that the jack circuit board is defective.
JimbobH
9 Posts
0
July 5th, 2011 13:00
hmm i rolled back the IDT audio driver to a previous version and the sound started working, i then reset my computer and it wasnt working again. How do i switch it to use the basic driver?
Jim Coates
4 Operator
4 Operator
•
13.6K Posts
0
July 5th, 2011 14:00
Section 6 of the Audio Driver FAQ
en.community.dell.com/.../19772824.aspx
A faulty sense pin can be an intermittent problem.