Unsolved
This post is more than 5 years old
8 Posts
0
15102
SNMP / WOL on DELL Poweredge 1955 Blades x10 system circa Jan 2008
Hi All,
Does anyone know the correct SNMP OID's for a DELL Poweredge 1955 Blade x10 chassis system for its main thermal and fan sensors? Or an internet resource that provide up to date mib's of the OID's for DELL servers?
Also, has anyone successfully got WOL working on this series of DELL Poweredge 1955 blade servers when fitted with a standard GigE through-put module?
My network is setup correctly to allow Windows Firewall exceptions on UDP ports and SNMP is also setup correctly, yet the DELL chassis and blades don't play nice :-(
Finally, does this series / generation of blade support IPMI?
Thanks,
Mike
Does anyone know the correct SNMP OID's for a DELL Poweredge 1955 Blade x10 chassis system for its main thermal and fan sensors? Or an internet resource that provide up to date mib's of the OID's for DELL servers?
Also, has anyone successfully got WOL working on this series of DELL Poweredge 1955 blade servers when fitted with a standard GigE through-put module?
My network is setup correctly to allow Windows Firewall exceptions on UDP ports and SNMP is also setup correctly, yet the DELL chassis and blades don't play nice :-(
Finally, does this series / generation of blade support IPMI?
Thanks,
Mike
Scott Hanson
342 Posts
0
March 2nd, 2010 14:00
MIBs are here - http://support.dell.com/support/downloads/format.aspx?c=us&l=en&s=gen&deviceid=1108&libid=36&releaseid=R214941&vercnt=6&formatcnt=0&SystemID=PWE_1955&servicetag=&os=WNET&osl=en&catid=-1&dateid=-1&typeid=-1&formatid=-1&impid=-1&checkFormat=true
Not sure about the WOL issues - maybe others will chime in.
cdmjno
8 Posts
0
March 2nd, 2010 15:00
I could really do with a DELL guru answering about WOL?
I could also really do with a DELL UK or Europe contact for further discussion on our Poweredge 1955's..Could you recommend how to go about getting in touch?
Thanks,
Mike
Scott Hanson
342 Posts
0
March 3rd, 2010 14:00
Scott Hanson
342 Posts
0
March 4th, 2010 07:00
Scott Hanson
342 Posts
0
March 4th, 2010 07:00
cdmjno
8 Posts
0
March 4th, 2010 08:00
Regards,
Mike
cdmjno
8 Posts
0
June 4th, 2011 15:00
re: my other thread here: http://www.delltechcenter.com/thread/4571889/IPMI+Configuration+on+PE1955+Blade+Servers+%2F
I really need some help getting very basic IPMI up and running now to my DELL PE 1955 blades.
Please can someone help!
Thanks,
Mike