Unsolved
This post is more than 5 years old
1 Message
0
52278
How to Configure iDrac 7 for monitoring in OME
I can't find any specific documentation about how to setup the iDrac 7 and OME to be able to monitor the iDrac7.
I've used an SNMP community name in OME and iDrac 7. When doing this a little bit more info shows up under the server in OME.
But under Devices > RAC - the iDrac 7 doesn't show up.
Any insight into this would be very much appreciated. Thanks.
DELL-Rob C
2 Intern
2 Intern
•
2.8K Posts
0
October 11th, 2012 07:00
Hi and thanks for the question.
Take a look at the Tutorial section on the OME console. There is a tutorial for "Discover and Monitor 12G Servers without OMSA". That should get you started in the right direction.
Good luck!
Rob