Unsolved
This post is more than 5 years old
14 Posts
0
76115
Precision M6500 does not boot
Hi,
I just have M6500 from a friend, when I try to turn it on the system won't boot. Fan spins and then the thing shuts off in a couple seconds.
Trying many things and it did not work
- With one memory slot DIMM1 from working station M6400
- Change the CMOS battery
- Change AC adapter from working station M6400
Any ideas how to fix this problem? Does the motherboard have the problem or something else?
Thank you
NetGuyCA
5 Posts
0
June 5th, 2014 08:00
I upgraded my RAM. Had to use 1066 RAM. M6500 would not boot up with 10600 or 1600 RAM - would hang at bios.Try using 1066 RAm 2x2 =4GB = PC3 8500.
CauAm
14 Posts
0
July 21st, 2014 18:00
Did try anything as suggested but still have the same problem. I change the new CMOS battery but it still has problems.
Please help!!!!.
Thanks,
amoney
1 Message
1
February 8th, 2015 16:00
I had the same issue. The solution that worked for me was to:
1) Power down my laptop
2) Disconnect the power cord from laptop
3) Remove battery from laptop (Remember to ground yourself before going inside your computer)
4) Remove memory sticks from laptop
5) Hold down power button for 30 seconds
6) Reassemble everything including power cord.
7) Turn computer on by pressing power button as usual
Good luck!