Unsolved
This post is more than 5 years old
12 Posts
0
68981
Reflash: USB Firmware Tool v1.20 or 1.21
I'm wondering anyone here might have a good copy of the Wyse USB Firmware Tool v1.20. WYSE website is missing the exe due to migration to Dell servers. I've lost about 20 hours trying to find it. Can someone here please email me the file to ????I I'd appreciate it.
mse
neko69
10 Posts
0
February 29th, 2016 02:00
Hi,
check your mail.
Kind regards
MSEast
12 Posts
0
February 29th, 2016 05:00
I need v1.20 or v1.21 (RFU), not v2.09 (WDM). I emailed WYSE Tech Support where they replied within a few hours; and sent me to a software and driver request form. Hopefully this will be resolved today (29th).
Thanks
mtoti62
1 Rookie
1 Rookie
•
3 Posts
0
March 21st, 2016 09:00
Hi Mike,
I just sent you usb tool v1.20 please check your email. Can I ask what model Wyse Client you are imaging?
Mary
MSEast
12 Posts
0
March 22nd, 2016 08:00
Hi Mary, and thanks for your support. I'm working with the Optiplex FX170 thin clients, WES7. I never received the tool, and wondering if you might try that again, or some other method. I'd appreciate it.
Thanks in Advance,ME
mtoti62
1 Rookie
1 Rookie
•
3 Posts
1
March 22nd, 2016 09:00
Hi ME,
I apologize about that I did try to send but since it's an exe file our exchange server is blocking it, I even tried to change the extension name but no go I uploaded it to Dropbox you should be receiving a link from me at let me know if you have any issue retrieving the file.
Mary
MSEast
12 Posts
0
March 22nd, 2016 09:00
... correction below
MSEast
12 Posts
0
March 23rd, 2016 02:00
Correction: Hi Mary and thanks again. Just occurred to me that it might run on Win7 or 8. Wanted to let you know that I'll try today and will report back.
Masjes
3 Posts
0
May 19th, 2016 09:00
I also need this tool. Can't find it anywhere. Can anybody please sent it to me also? I need the 1.20 or 1.18 version. The new one does't work right, it only showes rubbish. Lost my back-up.
Macoumba
1 Message
0
September 19th, 2016 06:00
Hi, I have the same issue. Can anybody send me or tell me where to find any USB imaging tool V 1.x. I'm trying to reflash a Wyse S30 with a private custom image that won't let you access to the config , alway trying to automatically run the company application, making the device useless. I bought a bulk of them and can't use them unless re-imaged. Thanks
RMontalvo
560 Posts
0
September 19th, 2016 13:00
I was unable to find that version of USB FT, but I found this document that explains an alternate way of upgrading Windows CE thin clients.[View:/cfs-file/__key/communityserver-discussions-components-files/4947/CE-_2D00_-How-to-Enable-Automatic-Upgrade.pdf:550:0]
marks77uk
1 Message
0
February 8th, 2017 23:00
can i have tool please
mtoti62
1 Rookie
1 Rookie
•
3 Posts
0
February 9th, 2017 04:00
Marks77uk,
I have v1.20 but need a way to send it our exchange server blocks exe's.
RMontalvo
560 Posts
0
February 28th, 2017 08:00
You can go to https://www.technicalhelp.de and under downloads you will find different versions of the USB Firmware tool.
craiuclaudiu
3 Posts
0
March 23rd, 2017 12:00
I need USB Firmware Tool 1.20.You can give me? My e-mail
Best regards!
rspconsulting
1 Message
0
March 24th, 2017 07:00
Hi, Can you please send me the 1.18 or 1.20 version of the tool as well? I am working with some C90LE7 thin clients that don't work with the 2.x versions of the tool.
Thank You,
Ray