well, first, let's see if the partitoin is still intact.
Boot to your Dimension resource CD, at the A: Prompt type FDISK.
You'll get a big paragraph about large disk support, press Y. This will bring up the FDISK Main menu
Option 4 will display partition information. If your partitions are intact, you should have a primary partiton & an extended partition, & 3 virtual drives on the extended partiton.
If the extended partition is missing, then that data is gone unless you use data recovery, which can be expensive.
DELL-Donald K
2 Intern
•
4K Posts
0
April 8th, 2004 04:00
well, first, let's see if the partitoin is still intact.
Boot to your Dimension resource CD, at the A: Prompt type FDISK.
You'll get a big paragraph about large disk support, press Y. This will bring up the FDISK Main menu
Option 4 will display partition information. If your partitions are intact, you should have a primary partiton & an extended partition, & 3 virtual drives on the extended partiton.
If the extended partition is missing, then that data is gone unless you use data recovery, which can be expensive.