This post is more than 5 years old
1 Rookie
•
16 Posts
0
2864
PowerEdge R730 with T6WNR 3.8TB SSD (SDLLOCDR-038T-5C23) 0%
We have 16 of these 0T6WNR 3.8TB SSD (SDLLOCDR-038T-5C23) drives showing 0% Remaining Rated Write Endurance in iDRAC in a PowerEdge R730 with PERC H330 Mini. Latest BIOS 2.6.0 and H330 Firmware 25.5.5.0005 and iDRAC Firmware 2.60.60.60.
When we put these in other Dell Servers they are also showing 0%. However, when we have them in a HPE ProLiant DL380p Gen8 with P420 controller they are showing 100%.
Can somebody please explain why the Dell Servers cannot determine the proper Remaining Rated Write Endurance.
Thanks for your help!
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
1
July 16th, 2018 15:00
Hello
Those drives are not validated for a normal R730. They are only validated for Datacenter Scalable Solutions variants. If you have a DSS system then you should contact your support team if there are issues.
Thanks
eggman_2112
1 Rookie
1 Rookie
•
16 Posts
0
July 20th, 2018 13:00
Thank you very much for the information. It is strange that HPE servers will show the health status and DELL servers will not. We will inform our customer of these findings.
Kind Regards,
Robert
dwright1542
19 Posts
0
April 22nd, 2019 20:00
Did you ever find a solution? I'm considering those drives as well for an R730XD