This post is more than 5 years old
4 Posts
0
7289
/etc/init.d/networker start nsrexecd: Failed to resolve the IPv6 localhost address ::1. Please verify an entry for the IPv6 localhost address exists in your /etc/hosts file.
Hi ALL,
I am getting this error on RHEL linux 5.4
IPv6 is disabled , and etntries are in place but still getting error . can you please advise
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost
::1 localhost6.localdomain6 localhost6
error as below
/etc/init.d/networker start
nsrexecd: Failed to resolve the IPv6 localhost address ::1. Please verify an entry for the IPv6 localhost address exists in your /etc/hosts file.
BACKUP_S
4 Posts
0
December 29th, 2013 04:00
Hi Hrvoje/Adam,
Thanks all for support and suggestions...as mentioned above all entries where added .
Issue is with my nsswitch.conf file on linux . It is not there i.e it was renamed to nsswitch,conf_old.
So when ever I start services it is not able to get parameters and getting failed ,s o finally I had renamed them and services started ....
Thanks again for Kind support ..
Bhanu.K
ble1
2 Intern
2 Intern
•
14.3K Posts
0
December 24th, 2013 03:00
IPv6 is probably not disabled - you can verify that from ifconfig -a where you will find ::1 entry most likely.
Your hosts entry should be something like:
mradamk
215 Posts
0
December 24th, 2013 05:00
Try changing the host file entry to the following;
::1 localhost loopback
This is the value I have and it was inserted automatically by Netwroker when installing the agent.
mradamk
215 Posts
0
December 24th, 2013 09:00
I believe so, I’m pretty sure I didn’t add it myself.
ble1
2 Intern
2 Intern
•
14.3K Posts
0
December 24th, 2013 09:00
NetWorker modifies /etc/hosts?
ble1
2 Intern
2 Intern
•
14.3K Posts
0
December 24th, 2013 09:00
I didn't see any release of NW doing that so far - so it might be done by either system or some other OS admin.