Unsolved
This post is more than 5 years old
236 Posts
0
4359
Unity network configuration
Hi All,
Does Unity 300 2 onboard x 10GB RJ45 ports (labeled 2 and 3) support connectivity for both iSCSI and file (CIFS, NFS)?
Appreciate your input.
Unsolved
This post is more than 5 years old
236 Posts
0
4359
Hi All,
Does Unity 300 2 onboard x 10GB RJ45 ports (labeled 2 and 3) support connectivity for both iSCSI and file (CIFS, NFS)?
Appreciate your input.
Top
Frederik.K
13 Posts
1
September 27th, 2016 23:00
Hi,
iSCSI CNA ports are front-end, onboard ports, supporting switched or direct attachment.Each port can operate at 10 Gbps, support VLAN tagging, and can have 32 virtual ports per physical port. Multiple iSCSI sessions per initiator connection is available at 10 Gbps only. Optical SFP or Twin-Ax copper are supported. Ports will also be available for File/Network features.
From Unity Hardware Fundamentals student guide April 2016
Rainer_EMC
8.6K Posts
0
September 28th, 2016 03:00
yes
if you want to use them for both then keep in mind NOT to configure LACP
since ISCSI doesnt support LACP you wont be able to configure ISCSI on a port where trunking is configured
victory_is_mine
236 Posts
0
September 28th, 2016 08:00
Thank you.
Can I configure LACP across 2 onboard x 10GB RJ45 ports (labeled 2 and 3), or across two CNA ports if they are used for File traffic? Can I configure LACP across 2 onboard x 10GB RJ45 ports and 2 x onboard CNA ports if they are used for File traffic?
In other words will it allow me to mix different network ports from different IO modules in LACP link, for example mix the onboard ports with ad on IO module ports in LACP?
Can I also do FSN across any of the ports, like it was done on VNX?
Rainer_EMC
8.6K Posts
0
September 28th, 2016 10:00
not different ones
up to 4 ports of the same type and on the same I/O module I think
if you find out how to do FSN on Unity then let me know :-)
Rainer