This post is more than 5 years old
5 Practitioner
•
274.2K Posts
2
11709
VxRail SFP+ partnumber
Hello Experts,
We have a lot of questions on SFP+ Part number to be ordered from Myquotes for VxRail. My quotes gives INSTLKIT-10GE-SFP+ . However the BOM for this doesn't specify whether it includes the SFP+.Can somebody please help us clear this doubt?
Thanks,
Virender Singh
GBlack3
18 Posts
0
April 27th, 2016 08:00
Doesn't look like this is available to customers which I would argue should be, but good to see it is now documented.
engmaliali
10 Posts
0
April 27th, 2016 08:00
If ordering VxRail with SFP+ the cables are not included. If connecting to a Cisco Nexus switch the following cables are suitable. “The TwinAx cables in MyQuotes should be available via the following EMC Model Number: 10G-SFPP-TWX0308 Description: DIRECT ATTACHED SFPP COPPER, 3M, 8-PACK It's an 8 pack of TwinAx cables so we'll only need 1 per appliance”. 10G-SFPP-TWX0308 SEL DIRECT ATTACH SFPP COPPER3M8-PACK 2 EA The units will ship with the correct number of cables required for RJ45 connectivity and a separate order is not required.
bcoleman2
5 Posts
0
June 17th, 2016 19:00
@engmalialiwhere did you find "10G-SFPP-TWX0308" referenced as an acceptable option for Cisco switches? The part number described is listed for Brocade switches? I cannot find any reference to Cisco Twinax support on the VxRail.
telenoiz77
1 Message
0
July 20th, 2016 09:00
The Twinax cables I was directed to are: BRSFP-TX3M8P , an 8 pack of 3M compatible with VxRail SFP+ and Brocade switch. Although, these are Brocade cables, and I cannot find a compatibility matrix for Twinax cable models to Cisco switches. The switch side will be Cisco Meraki MS-425. Has anyone discovered a Twinax interop matrix between switch vendors ?
Rieko
13 Posts
1
July 20th, 2016 14:00
Twinax cables come with connectors and they are switch dependent. ToR vendors provide their own for this reason. Cisco-Meraki is an acquisition is not the "real" Cisco switch. So a Twinax that works for Nexus may not work for Meraki.
kwmt
4 Operator
4 Operator
•
880 Posts
0
September 15th, 2016 18:00
Now we can select VxRail SFP+ option in MyQuotes.
The parts number is "VXRAIL-OPTIC-SR".
Thanks for order systems update.
https://support.emc.com/docu62876
JiriVidgren1
3 Posts
0
August 17th, 2017 12:00
Hi,
What about using LR-optics? Customer is having a LR-environment, and they are asking if they can use the same LR-optics with VxRail installation as well. I know that our NIC's supports LR-optics.
Thanks!